Z3X LG 2-3G Tool v2.4 build 00A2 release
Added KU2000 direct unlock, read nand, read/write/repair nvm
Added SU200 direct unlock, read nand, read/write/repair nvm
Added BL20, BL20e, BL20v, BL20t, BL42k repair sec zone function
Added BL40, BL40e, BL40f, BL40g repair sec zone function
Added GU280, GU280f, GU282, GU285, GU285g, GU285f repair sec zone function
Added GU290, GU290fPO, GU292, GU295, GU297, GU297A repair sec zone function
Added SH650 new customization for SW650808 version
P.S.
For unlock KU2000, SU200 you must start phone in download mode (Volume Down + Camera + Power).
For Read/Write/Repair nvm in KU2000, SU200 you must start phone in emergency mode (Send Call + Camera + Power).

NCK Dongle V.1.9.6 UPDATE
ADDED:
NCK Dongle Flash Tool
Alcatel MTK, LG MTK, Huawei MTK, ZTE MTK
Read flash.
Write Flash
Write factory flash(flashes posted in support area ONLY)
Format phone
Reset factory defaults (zte phones with counter )
Read info and prvider id ( This is handy for Moto WX to allow PID Check.
Zte reset factory default work with normal v3 cable
ZTE Standalone code Calculations for:
ZTE GR250
ZTE N290
ZTE R220
ZTE GS213
ZTE GS203
ZTE 811
ZTE E810

Octopus Box SE - SK17i, ST15i, SO-02C, SO-03C support added
Octopus Box SE Software v1.0.3 is out! We have added Unlock and Repair IMEI for Sony Ericsson SK17i, ST15i, SO-02C, SO-03C cell phones!
Octopus Box SE Software v1.0.3 Release Notes:
SK17i – added Unlock, Repair IMEI, Write Firmware, Read/Write/Repair TA.
ST15i – added Unlock, Repair IMEI, Write Firmware, Read/Write/Repair TA.
SO-02C – added Unlock, Repair IMEI, Write Firmware, Read/Write/Repair TA.
SO-03C – added Unlock, Repair IMEI, Write Firmware, Read/Write/Repair TA.
Fixed "No network" problem after Unlock with third-party tools.
In order to perform Unlock and Repair IMEI operations with Sony Ericsson SK17i/ST15i/SO-02C/SO-03C, you'll need to use TP. For a detailed information on this subject please refer to the manual located in the "Cable & Manual" tab. Manuals are available for all supported models.
Important! Note that one Sony Ericsson phone Unlock or Repair IMEI for Octopus Box owners will cost 10 Octopus SE Credits. If you don't own Octopus Box, you'll have to pay 13 credits for Unlock or Repair IMEI operation.

Fenix Key SLAP 4.1 beta direct SL3 Unlock Clusters
- Fixed small bugs
- GPU temperature increased to 120 degrees Celsius
Fenix Team has just released the best SL3 solution on the market.
- Split calculation for up to 10 computers.
- 16 GPU's supported.
- SLAP stops calculation and move to the next position in queue when other computer has finished calculation - you do not need to configure anything, computers do not need to be in same network - Internet connection required.
- SLAP sends mail to you and your clients when NCK is ready to use.
- SLAP is more stable and faster now.
- User friendly interface.
IMPORTANT INFO:
1. SLAP 4.1 requires OclHashCatLite. You can download it from: oclHashcat-lite - advanced password recovery
Run SLAP 4.1 and go to Settings tab, click on text box next to "OclHashCat exe.path" and select oclhashcat-lite.exe location (32 or 64 bits). ATI cards are supported. Full user manual will be available within several days.
2. You must update Fenix Card in order to use new version.

NsPro v6.1.3 released
Added S3770K, S5610 support.

NOTE: Paid activation may be required to use this new version as this is needed if you want to update and your 12 months activation period has expired.

Fenix Key SLAP 4.0 beta direct SL3 Unlock Clusters
Fenix Team has just released the best SL3 solution on the market.

- Split calculation for up to 10 computers.
- 16 GPU's supported.
- SLAP stops calculation and move to the next position in queue when other computer has finished calculation - you do not need to configure anything, computers do not need to be in same network - Internet connection required.
- SLAP sends mail to you and your clients when NCK is ready to use.
- SLAP is more stable and faster now.
- User friendly interface.

IMPORTANT INFO:
1. SLAP 4.0 requires OclHashCatLite. You can download it from oclHashcat-lite - advanced password recovery.
Run SLAP 4.0 and go to Settings tab, click on text box next to "OclHashCat exe.path" and select oclhashcat-lite.exe location (32 or 64 bits). ATI cards are supported. Full user manual will be available within several days.
2. You must update Fenix Card in order to use new version.

RIFF JTAG - Samsung i9003, Samsung m820 supported
Samsung i9003 (Samsung Galaxy SL) Unbrick, boot repair
Samsung m820 (Samsung Galaxy Prevail) Unbrick, boot repair
ZTE RD518 Boot repair
To download and install updates, please close all running applications and press "Check for Updates" button in RIFF JTAG Manager.
Carefully read resurrection manual for i9003 to avoid frustration !

Kulankendi KK Ver 3.11 Released ! Alcatel Android based unlock by IMEI available
Added Alcatel Android based, unlock codes calculation by IMEI:
OT-908
OT-909
OT-910
OT-980
OT-981
OT-990
OT-A990
OT-C908
OT-C990
OT-MOVE
OT-V958
* Alcatels/Vodafone MTK unlock code calculator *
1. Select producer, correct device type model from the drop-down list.
2. Pay by PAYPAL or Credits Card.
3. Enter IMEI number to correct place in KKMC exe
4. Enter ProviderID(see example picture on support: AlcatelMTK.jpg)
5. Click EXECUTE to get code(s)
6. Write code ( NCK, SPCK ) to phone by keypad and accept by OK button.

SCout flasher v1.43
Updated Android communication library
Updated drivers for the P2K & Android based phone models
Fixed issue in flashing procedure for MB200 and МВ300 Android based handsets

SETOOL-extremely important message !!!
extremely important message !!! BY Laser

seems most of lately produced msm7227-based phones have chipset with FIXED security hole, which used to altbypass unlock.
( that is not 100% confirmed, we only have few reports, however better be warned )
such phones will DIE after successful unlock procedure.
such dead phones CAN NOT be recovered. ( perhaps, jtag can fix that, perhaps, qualcomm fixed jtag security hole too )

there is NO WAY to determine if phone has fixed chipset or chipset with security hole.

the ONLY safe way is to use unlock by resurrection cables.
if phone can be connected and booted by resurrection cables, phone is safe to unlock.
if phone can not be booted by resurrection cables, phone has fixed chipset and could not be unlocked.
you have been warned.
get and use resurrection cables.

UPDATE
e16 phone with manufacture date 11w38 affected, i think we should care about phones which produced after 11w26
 

NsPro v6.1.2 released
-Added C414R, E1080W, E1190, E3210, T379 support.
-Added I9100 direct unlock.
-Added S5830 (Galaxy Ace) android 2.3.x support.
Is Highly recommended to use latest nspro version.
Latest NsPro version is available for download on NsPro support area

NOTE: Paid activation may be required to use this new version as this is needed if you want to update and your 12 months activation has expired.

RIFF JTAG - Samsung updates

Samsung Galaxy S Plus (i9001) Unbrick, boot repair supported
Whats new : Samsung Galaxy S Plus (i9001)
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

SETool v1.1201
- resurrection procedure will now work for totally erased s1 qualcomm-based phones

FAQ now have resurrection procedure example. - forgot to post, that starting from v1.12 setool2 will check for faulty cypress-based reader and refuse to run, if setool2 smartcard installed in such reader. There is no any workaround. Use om****y-based reader like FoneFunShop Unlock Box.

Z3X BOX LG 2-3G Tool v2.4 build 009E release
LG 2-3G Tool v2.4 build 009E
Added Update Manager - for very fast update hints, patch, unlock base, etc...
Added KU9100 unlock for KU910905 version
Added SH150A unlock for SW15A707 version
Added KU6000 unlock for KU600808 version
Added SH130 unlock for SW130709 version
Added SH410 unlock for SW410804 version
Added KU6000 unlock for KU600816 version
Added GW550 new version support adedd(M76XXDSDCAOPZM-656010 , CCI:LG LQ86 1.9.04b)
Added GW550 new version support adedd(M76XXDSDCAOPZM-656010 , CCI:LG LQ86 1.0.27)
Added G610 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G622 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G632 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G635 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G639 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G660 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G672 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G677 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G682 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G688 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G810 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G822 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G828 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G850 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G912 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added G920 write firmware, read/write fullflash, read/write call.data, direct unlock, imei repair, factory reset
Added GD880, GD880f, GD880G repair sec zone function
*Fixed Infineon Egold flashing - after flash phone not turn on.
*Many optimization in code and GUI.

Infinity Box Content Extractor 2.27 Released
version 2.27
- Nokia: Improved extraction of contact telephone FullFlash for Symbian S60
- Samsung: Added support for extracting contacts from RAWTFS (2 versions)
- Samsung: Added support for retrieval of contacts for new Swift (type E2152)
- Samsung: Updated list of supported models

Medusa Box v1.2.4
Medusa Box v1.2.4 is out! We have added FREE IMEI Repair, FREE Full Security Repair (TA Repair) and FREE Sony Ericsson U20i Unlock (no server, no credits, no queues, no limits). Also we have added support for HTC Desire Z, Samsung 707SC and Samsung S8530!

Medusa Box v1.2.4 Release Notes:
Added support for the following phone models:
Sony Ericsson U20i – added Unlock (via TP) and IMEI Repair and Full Security Repair (TA Repair)! Absolutely FREE (no server, no credits, no queues, no limits)!
HTC Desire Z – added Unlock (via Read codes), Repair CID, Repair IMEI, Repair OSBL, SPL, HTC (Security area) partitions.
Samsung S8530 – added Dead Boot Repair/Phone Repair.
Samsung 707SC – added Dead Boot Repair/Phone Repair.
Updated Medusa JTAG Box libusb drivers to 1.2.5.0 version. May require computer restart.
Optimized JTAG I/O speed. Increased up to 25%.
Improved support for Cypress-based SC readers.

Medusa Box Flasher v1.0.2 Release Notes:
Added support for the following phone models:
Sony Erricsson U20a – released Write Firmware, Read/Write/Repair TA.
Sony Erricsson U20i – released Write firmware, Read/Write/Repair TA.
To resurrect these devices perform the following steps:
Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Select the "EasyRepair" mode.
Press the "EasyRepair" button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

New ATF Read Flash ALL BB5 Phones v7.80 Update
ATF v7.80 Update
Release Date: October 25, 2011
BB5 Major Functions Added:
<<< All BB5 Flash Functions are now using the Newest Nokia Loaders 11.34.000.2 >>>
- Authorize Phone for RAPUYAMA v2.1 Phones via USB or FBUS (Nokia
500, 600, 603, 700, 701 etc...)
 

---> SD Repair
---> Stand Alone SX4
---> Read PM 120 Hashes

- Read Flash Enabled for RAPUYAMA v2 Phones via USB or FBUS (Nokia
500, 600, 603, 700, 701 etc...)
- Read Flash Enabled for RAP3Gv30 Phones via FBUS Cable (5130c,
3110c, 7210c, 6300c etc...)
- Read Flash 8MB Limitation on RAP3Gv40 Phones Removed... Now you
can Dump Full Flash Chip in 1 Session
- Extract Phonebook Contacts from Symbian Belle Flash Dumps made by the Read Flash Function
- Write Full Nokia Original RPL for all BB5 Phones (SL1, SL2, SL3,
PA_SIMLOC30 15-digit and PA_SIMLOCK30 20-digit)

---> Write Simlock Data
---> Write Super Dongle Key
---> Write CMLA Key
---> Write WMDRM Key
---> Write PARTNERC (If Available)
---> Write MDM_KEYS (If Available)
- N900, N950 and N9-00 Full PM Backup Fixed
- Read / Write Product Profile Added
- Added more Phone Modes for changing (Alarm, Charging, Discharging etc...)
- Added Ability to read Multiple MMC Passwords in 1 Phone (upto 16 MMC Passwords)

SL3 BF Server Changes:
- Reduced SL3 BF Price from 30 Credits to 25 Credits

General Updates:
- Added New Products to Nokia.ini
- Added Updated Provider Listing for MNC_MCC Codes
- New Skins Added with Better Compatibility
- Fixed FTDI Device Close problem on New FTDI Libraries
- Mass Memory Flashing Automatically Switches to Turbo Mode when needed.
- Reads more Information from the Phone during Scan Phone (All Information Available)
- Fixed Problem for ATF Boxes which ask you to install Drivers each time you Start ATF Software

Support Page Updates:
- Added Credit Transfer for ATF Activation Credits (Now you can transfer your activation credits extra to other boxes)

Driver Updates:
- ATF Box Driver v2.08.17(Beta)
- Nokia Connectivity Driver v7.1.45.0
- libusb Driver v1.2.5.0

Update Summary:

1. Uses Latest Nokia Loaders 11.34.000.2
2. Can Authorize ALL BB5 Phones
3. Can Read Flash Chip from ALL BB5 Phones except RAP3Gv2 (6630, N90, N70... very old Phones)
4. Can Extract Contacts from Symbian Belle Flash DUMPS
5. Can Full Write Nokia ORIGINAL RPL

NsPro v6.1.1 released
Added B7510, C3303i, C3500, E1050, E2330B, I9100, T499, T589, T759, T839 Support.
Latest NsPro versions are available on NsPro support area

NOTE: Paid activation may be required to use this new version as this is needed if you want to update and your 12 months activation has expired.

SETOOL v1.12 HOT UPDATE RELEASED

- added altbypass support for xperia arc_s model, in other words, phones with 8255T chipset fully supported.
- added resurrection support for s1 qualcomm-based phones with totally damaged security zone.
resurrection procedure will be described in FAQ later,
however, in short it is standard "recovery+write gdfs+unlocking" chain.

7227,8250-based phones require special uart cables ( pinout included in docs ),
however it is highly recommended to use special GPG cables
8x55-based phones does not require any special cables.

as side effect, imei repair possible now for s1 qualcomm-based phones.
for 7227,8250-based phones need select COM as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to repair imei when unlocking, use testpoint (gnd type) )
for 8x50-based phones need select USB as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to repair imei when unlocking )

cost of imei repair 5 credits, please take in mind, that if you repair imei, phone need to be unlocked,
so add another 5 credits for unlock procedure.
if you have calculated signature for some imei, then you can save 5 credits for unlocking

- added few models to model list, so users don't get confused
- different bugfixes

Z3X BOX LG MTK Smart Tool 2.0.1.0
-Improved support of phones , based on MT6253 chipset.
-Fixed some models avatars.
-Faster software startup , few seconds on new smartcards.

LG Module:
Added:
- LG A155 support(Unlock, Flash Reading, Codes Reading)
- LG A165 support(Unlock, Flash Reading, Codes Reading)
- LG GB161 support(Unlock, Flash Reading)
- LG KG198 support(Unlock, Flash Reading)

ALCATEL Module:
Added some new pids for existing models base updated to Sept. 2011. P.S Many new pids will be avaiable in next release.
-Alcatel OT-361 Calc Codes NCK etc.
-Alcatel OT-362 Calc Codes NCK etc.
-Alcatel OT-385(J) Calc Codes NCK etc.

RIFF JTAG - LG & HTC updates
Whats new :
Added support for: LG SH860
Added support for: HTC Desire CDMA
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

ORT-JTAG - HTC New Models and ORT Plus V1.68 Released
HTC INCREDIBLE S / S710E / G11 Repair Boot
What's New in ORT Plus V1.68 ?
Broadcomm BCM2156 Bug Fixed
Released Stuffs :
ORT Plus V1.68
HTC INCREDIBLE S / S710E / G11 Repair File
HTC INCREDIBLE S / S710E / G11 JTAG Pinout

Micro-Box AIO V2.0.4.0 HUAWEI IMEI CALCULATOR FREE !! NO LOGS
- Huawei G6602 ( beta )
- Huawei G6608 ( beta )
- Orange Panama
- Huawei G6620

PolarBox Suite Update 2.7.4 : MORE Gxxxx More PHONES ADDED WORLD FIRST
•••••••••••••••••••••••••••••••••••••••
PolarSuite Update v2.7.4
PandaSuite Update v1.4.2
PolarSAT Update v1.3.4
•••••••••••••••••••••••••••••••••••••••
HUAWEI PHONES (MTK Platform)
* Huawei G5010 ( World first via calculation !!! )
* Huawei G7002 ( World first via calculation !!! )
[+] Added READ CODES via calculation (with cable)
[+] Added UNLOCK via imei calculation (cable not needed)
[+] Process totally safe and no risk to damage phone (no patch, no flash, etc ...)
[+] All firmware versions supported (as usual)
[+] UserCode / Factory Settings (added secuences)
[+] Process takes 10 credits (server online needed)

SAMSUNG PHONES
* Samsung E1081T
[+] Added support for this model (unlock)

OTHER PHONES (via imei calculation)
* SFR Messenger Edition
* Orange Indie
* Optimus Sydney
* ZTE 151
* ZTE 810
* ZTE 811
* ZTE Soft Stone
* ZTE Vari Touch811
* ZTE N295
[+] Unlock via IMEI CALCULATION (not needs cable)
[+] All firmware versions supported
[+] Process not need credits, totally free and unlimited

OTHER IMPROVEMENTS AND CORRECTIONS :
[+] Improved server, for solve some problems during P3-CARD link process
[+] Fixed problem with calculation of Vodafone541 (now you not need select OT-708)
[+] Added and completed some othe providers in server (alcatel and motorola MTK based)
[+] Some other minor bugs fixed internally

Sptbox deluxe 12.3.6 released
* First in World GT-S3770 Flash/Unlock/Imei
* First in World GT-S3778 Flash/Unlock/Imei
* First in World GT-S3778v Flash/Unlock/Imei
* First in World GT-S5270L Flash/Unlock/Imei
* First in World GT-I9103 Unlock/Imei(Root Required)
* First in World GT-S5360 Unlock/Imei
* First in World GT-S5363 Unlock/Imei
* First in World GT-S5360C Unlock/Imei
* First in World GT-I9008 Direct Unlock/Imei
* First in World GT-I9008L Direct Unlock/Imei
* First in World GT-P7500 Unlock/Imei(Root Required)
* First in World GT-P7500C Unlock/Imei(Root Required)
* GT-I9018 Unlock/Imei
* GT-E1180 Flash/Unlock/Imei

AVATOR BOX (China Phones Service Tool) VER 5.700
New features:
1 [MSTAR] DIRECT IMEI REPAIR (including Micromax X550 Supported)
[MSTAR]All MSTAR CPU SUPPORTED TILL NOW
2 [SPD] Support SC6610/20 serial flash
3 [All Chips] Support new serial flash memory:
SF_W25Q16CV
SF_N25Q032
SF_N25Q064

Bug fixes:
1.[SPD] Fix SC6600D ReadFlash
2¡ê? some tiny bug fixed

Pegasus Box v1.1.4
Pegasus Box v1.1.4 is out! We have added support of various features for a wide range of Samsung mobile phones.
Pegasus Box v1.1.4 Release Notes:
Added support for the following Samsung models:
T139 – Read Unlock Codes/Direct Unlock/IMEI Rebuild.
T379 – Read Unlock Codes – World's First!
T499Y – Read Unlock Codes/Direct Unlock/IMEI Rebuild/Factory Reset/Reset Pattern Lock – World's First!
T499V – Read Unlock Codes/Direct Unlock/IMEI Rebuild/Factory Reset/Reset Pattern Lock – World's First!
S5830D – Read Unlock Codes/Direct Unlock/IMEI Rebuild/Factory Reset/Reset Pattern Lock.
A667 – Read Unlock Codes – World's First!
Added world's first emptyboard (swapboards with MSLAdress 0000000000) programming option for the following phone models: D780, D788, D880, D888, P240.
Fixed E1086i Unlock bug.
Added Factory Reset option for all OMAP based phones (S5660, S5830, I8700, T589, T499 etc.).
Note that Factory Reset operation will wipe all the information from your phone, so there's no need to reflash it anymore after you've removed User Lock and Pattern Lock. Remember! All user data will be lost.

Cyclone Box v1.0.0.11671
- Added PA_SIMLOC30 Original Nokia RPL Write support in SIMLOCK2 format
- The NCK length is now automatically recognized upon RPL write, so correct NCK array lenght might be assumed
- Minor changes and bugfixes
Autoupdate should do the job, in case of any problems (or interrupted update) you can manually download exe from http://www.karwos.hk/updater/Cyclone.exe and place in C:\Program Files\Cyclone Box\

Polar box 2 update v2.73 ready more hot news
•••••••••••••••••••••••••••••••••••••••••••
PolarSuite Update v2.7.3
PandaSuite Update v1.4.2
PolarSAT Update v1.3.4
•••••••••••••••••••••••••••••••••••••••••••
BLACKBERRY PHONES (RIM Platform)
MEP-17568-003
[+] Added more HOT new MEPs for users !!
[+] For sure, all meps supported actually (best and easy BB code reader)
[+] Process as usual, needs internet connection
[+] All MEPs supported (249 mep files)
Added codes calculation via PRD´s (Imei + PRD)
[+] Now you can unlock your Blackberrys more easy, using IMEI + PRD
[+] Added full complete database of PRDs (more than 5000 in our server)
[+] Process for testing, please report any issue with this service ...

ALCATEL / SFR PHONES (MTK Platform)
* SFR 1150
[+] Read Codes functions added for this models (no more FLASHING for unlock)
[+] Full extended READ CODES (5 levels added)
[+] Write function (Firmware, Language and Eeprom backup)
[+] Change language (via Flashing)
[+] Repair function (via Flashing)
[+] Reset Usercode (via Flashing or Format FFS)
[+] Working with baudrate up to 921.600bds
[+] Prepairing now Flashfiles for add to support

OTHER PHONES (via imei calculation)
* Orange Dallas
* Orange Rio 3G
* SFR 522
* Telstra T3020
* Vodafone 945
* ZTE GR250
* ZTE GS203
* ZTE GS213
* ZTE T220
* ZTE Raise
[+] Unlock via IMEI CALCULATION (not needs cable)
[+] All firmware versions supported

Other improvements and corrections :
[+] Fixed some problems in connection with Samsungs Zxxx/ZVxx Series (old models)
[+] Disabled metalbox detection in PolarSAT (make conflict with P3Card)
[+] Added and completed some providers for 203, 306, 565, M390 alcatel phones (MTK based)
[+] Fixed problem with provider in Alcatel F121 model
[+] Some other minor bugs fixed internally

Infinity Box ** 20-10-2011: UTStarcom/PCD, ZTE, Lanix models supported
.UTStarcom/PCD-GLPF1114MX (Mexico) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.UTStarcom/PCD-GPFL1238CW (Panama) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.ZTE-N295 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Lanix-LX11 model supported
.Alcatel-301 operations improved
.Movistar-Match operations improved (new lock type supported)
.security area repair improved (11 new firmwares supported)
.firmware database updated.

Micro-Box AIO V2.0.3.9
Added 5 NEW models:
- SFR 151,
- ZTE 151,
- ZTE Z525,
- ZTE X632,
- MOVISTAR MATCH
FREE AND UNLIMITED STANDALONE UNLOCK !!!

Infinity-Box: Alcatel/MTS, PCD/UTStarcom and other models updated
.Alcatel/MTS-352 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.PCD/UTStarcom-CL1135 (America) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Micromax-X266 model included in list
.Fly-E147TV model included in list
.Fly-DS155 model included in list
.NGM-Enjoy (Italy) model included in list
.Alcatel-208 operations improved
.security area repair improved (9 new firmwares supported)
.firmware database updated

Octopus Box LG v1.9.5
S367 – added world's first Unlock, Write Firmware, Read/Write/Repair EEPROM, Read Full Flash, Repair IMEI, Repair BT!
T510 – added world's first Unlock, Write Firmware, Read/Write/Repair EEPROM, Read Full Flash, Repair IMEI A/IMEI B/BT!
T515 – added world's first Unlock, Write Firmware, Read/Write/Repair EEPROM, Read Full Flash, Repair IMEI A/IMEI B/BT!
T530 – added world's first Unlock, Write Firmware, Read/Write/Repair EEPROM, Read Full flash, Repair IMEI, Repair BT!
Fixed minor bugs

Infinity Box MModule v4.03
.Lenovo-A330 (Venezuela) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Alcatel-355 operations improved
.Alcatel-508 operations improved
.UTStarcom-GTX212CA model included in list
.firmware structure detection (simlock and user code) methods improved
.security area repair improved (12 new firmwares supported)
.firmware database updated

Infinity-Box: LG, Huawei, ZTE, Orinoquia, Avio, Fly models updated
.LG-A120 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.LG-GS205 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.LG-KF301 model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Huawei-G3510m (8Mb flash chip version) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.ZTE-G-R236 (Portugal) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Orinoquia-G5580 (Venezuela) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Avio-A102 (Vietnam) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Avio-A203 (Vietnam) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Avio-A403 (Vietnam) model supported (flash read/write, sp-unlock, user code, repair, emptyboard flashing)
.Lenovo-Shark-32 operations improved
.Alcatel-508 operations improved
.Motorola-WX161 operations improved
.Phillips-X519 model included in list
.Fly-MC165 model included in list
.Fly-E150 model included in list
.Fly-E171 model included in list
.Fly-E190 model included in list
.Fly-Ezzy3 model included in list
.security area repair improved (147 new firmwares supported)
.firmware database updated

ORT-JTAG Samsung and HTC Models added and more
Samsung GT-S5560C Repair Boot
Samsung GT-S5520 Repair Boot [Thanks to Xiaoyuz]
K-Touch E379 Repair Boot [Thanks to Wind Biao]
HTC Desire HD / HTC Ace / A9191 / G10 Repair Boot [Thanks to Lihai]
Released Stuffs :
Samsung GT-S5560C Repair File
Samsung GT-S5560C JTAG Pinout
Samsung GT-S5560C FULL Flash RAW Dump
Samsung GT-S5520 Repair File
Samsung GT-S5520 JTAG Pinout Pinout
Samsung GT-S5520 FULL Flash RAW Dump
K-Touch E379 FULL Dump
K-Touch E379 JTAG Pinout
HTC Desire HD Repair File
HTC Desire HD JTAG Pinout Pinout

AxeBox Update
Generic Fast Android Code Reader Beta
HTC Desire HD
HTC Vision

Infinity Nokia BEST Dongle : Now you can downgrade all BB5 Phones

We are excited to inform you it is now possible to downgrade all BB5 phones with BEST Dongle
Here is simple instruction how-to downgrade new SL3 phones via Erase method.
( Also this will be useful for repair phone - like - full SW rebuild ( Erase )
 

Platforms :
By ONLY USB cable can be done with :
RAPU11 - 6700, E52,E72, 5630, C5, N8, C7, C6-01, C3-01, X3-02, C5-03, E7, E6, E5, X7, T7 and others.
RAPU21 - X3-02, C3-01, 500, 600, 700, 701 and others ...

By FBUS ( RPL BACKUP via JAF box as interface ) + all other via USB can be done with :
RAPIDO - 5530,N97,5800,C6,5250,5230,X6,E71,E75 and others
FBUS needed only for RPL backup (NPC/CCC/HWC sections). Erase, Flash, Repair - possible by USB cable only.

By FBUS ( Log reading ) + all other via USB can be done with :
RAPV4 - X3, 3710, 6303i, 7230 and same ...
FBUS needed only for log read (for security repair operations). RPL backup, Erase, Flash, Repair - possible by USB cable only.

By FBUS can be done with :
RAP3G phones - 6303c, 5130 and same ...
OLD RAPIDO phones - 5800, N81 and same ...
OLD RAPU11 phones - 6700, E52, E72 and same ...

Example with RAPU21 phone - Nokia 500 (RM-750)
Phone version before : 010.31
Needed version to flash : 010.29
Using USB cable.

Actions :
1st step : RPL backup, PM backup, PP backup
2nd step : Erase FLASH
3rd step : Flash needed FW version
4th step : RPL restore
5th step : Repair SDD if needed, do Local SX4 + Upload PM
6th step : Factory sets, edit production data, run phone

Time for all - less than 5 minutes

BB-BOX RELEASE V 1.2.3
Hi to all,
This is the latest Update for BB-Box customers :
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
BB-Box Update v1.2.3
BB-Sat Update v1.3.3
-=-=-==-=-=-=-=-=-=-=-=-=-=-
ALCATEL VODAFONE AND SFR PHONES (MTK Platform)
Alcatel Amsterdam
Alcatel OT-090
Alcatel OT-103
Alcatel OT-104
Alcatel OT-105
Alcatel OT-106
Alcatel OT-108
Alcatel OT-109
Alcatel OT-112
Alcatel OT-113
Alcatel OT-140
Alcatel OT-150
Alcatel OT-203
Alcatel OT-203E
Alcatel OT-204
Alcatel OT-205
Alcatel OT-206
Alcatel OT-208
Alcatel OT-209
Alcatel OT-213
Alcatel OT-216
Alcatel OT-222
Alcatel OT-223
Alcatel OT-250
Alcatel OT-252
Alcatel OT-255
Alcatel OT-255D
Alcatel OT-280
Alcatel OT-300
Alcatel OT-303
Alcatel OT-304
Alcatel OT-305
Alcatel OT-306
Alcatel OT-315
Alcatel OT-315M
Alcatel OT-352
Alcatel OT-355
Alcatel OT-355D
Alcatel OT-356
Alcatel OT-360
Alcatel OT-361
Alcatel OT-362
Alcatel OT-363
Alcatel OT-380
Alcatel OT-383
Alcatel OT-455
Alcatel OT-505
Alcatel OT-505K
Alcatel OT-506
Alcatel OT-508
Alcatel OT-540
Alcatel OT-543
Alcatel OT-556
Alcatel OT-557
Alcatel OT-565
Alcatel OT-565K
Alcatel OT-565_Old
Alcatel OT-600
Alcatel OT-602
Alcatel OT-606
Alcatel OT-660
Alcatel OT-665
Alcatel OT-706
Alcatel OT-708
Alcatel OT-710
Alcatel OT-710D
Alcatel OT-756
Alcatel OT-757
Alcatel OT-799
Alcatel OT-800
Alcatel OT-802
Alcatel OT-802Y
Alcatel OT-803
Alcatel OT-806
Alcatel OT-807
Alcatel OT-808
Alcatel OT-880
Alcatel OT-980
Alcatel OT-981
Alcatel OT-B331
Alcatel OT-C551
Alcatel OT-C552
Alcatel OT-C651
Alcatel OT-C652
Alcatel OT-C700
Alcatel OT-C701
Alcatel OT-C707
Alcatel OT-C717
Alcatel OT-C750
Alcatel OT-C820
Alcatel OT-C825
Alcatel OT-Crystal
Alcatel OT-E221
Alcatel OT-Elle_N3
Alcatel OT-F115
Alcatel OT-F121
Alcatel OT-F122
Alcatel OT-F331
Alcatel OT-F344
Alcatel OT-Friends
Alcatel OT-i606
Alcatel OT-i650
Alcatel OT-i802
Alcatel OT-i880
Alcatel OT-Magic
Alcatel Mandarina Duck MD-01
Alcatel Mandarina Duck MD-02
Alcatel OT-Q3
Alcatel OT-S210
Alcatel OT-S215
Alcatel OT-S218
Alcatel OT-S319
Alcatel OT-S320
Alcatel OT-S321
Alcatel OT-S520
Alcatel OT-S521
Alcatel OT-S621
Alcatel OT-S626
Alcatel OT-S853
Alcatel OT-S860
Alcatel OT-S920
Alcatel OT-Test
Alcatel OT-V555
Alcatel OT-V570
Alcatel OT-V607
Alcatel OT-V670
Alcatel OT-V770
Alcatel Playboy
Flip E-100
Lobster S621
Miss Sixty
Motorola Wx180
Motorola Wx181
Motorola Wx280
Motorola Wx288
Motorola Wx295
Motorola Wx390
Motorola Wx395
SFR-115
SFR-121
SFR-344
TCL M-298
Virgin Mobile VM-202
Virgin Mobile VM-363
Virgin Mobile VM-621i
Virgin Mobile VM-800
Vodafone 150
Vodafone 250
Vodafone 252
Vodafone 331
Vodafone 345
Vodafone 541
Vodafone 555
[+] Read Codes functions (unlock)
[+] Full extended READ CODES (5 levels added)
[+] ALL providers supported

BLACKBERRY PHONES (RIM Platform)
MEP-34870-002
MEP-04104-008
MEP-06041-012
MEP-06041-013
MEP-42490-002
[+] Added more HOT new MEPs for users !!
[+] For sure, all meps supported actually (best and easy BB code reader)
[+] Process as usual, NOT needs internet connection
[+] All MEPs supported (248 mep files)

HTC PHONES (Android and Windows Platform)
* HTC Sensation
* HTC Evo 3D
[+] Flashing function added
[+] TempRoot function added
[+] Fixed bug in some HTC Desire versions
[+] Fixed bug checking license/credits for some HTCs
[+] Added new TempRoot for some new HTC familys (Pyramid/Shooter)
[+] Fixed other internal problems

Sptbox deluxe 12.2.5 released
* First In World GT-I5700 EFS REPAIR(00000 imei) With One Click
* First In World GT-I5700E EFS REPAIR(00000 imei) With One Click
* First In World GT-I5700L EFS REPAIR(00000 imei) With One Click
* First In World SHW-M180S Flash/Unlock/Imei
* First In World GT-I9100G Flash/Unlock/Imei(Root Required)
* First In World GT-I9108 Flash/Unlock/Imei(Root Required)
* First In World GT-I9103 Flash
* First In World GT-S5360 Flash
* First In World GT-I5500M Flash/Direct Unlock/Imei
* First In World GT-S5660M Flash/Direct Unlock/Imei
* First In World GT-S5838 Flash/Direct Unlock/Imei
* First In World GT-S5578 Flash/Direct Unlock/Imei
* First In World GT-E2220 Flash/Direct Unlock/Imei
* First In World GT-S3350M Flash/Unlock/Imei
* First In World GT-E1195 Flash/Direct Unlock/Imei
* First In World GT-E1190 Flash/Direct Unlock/Imei
* First In World GT-E1182L Flash/Direct Unlock/Imei
* First In World GT-E2558D Flash/Direct Unlock/Imei
* First In World SCH-I509 Flash/Direct Unlock/Imei
* First In World SGH-A847 Flash/Direct Unlock/Imei(BETA)
* First In World SGH-A847R Flash/Direct Unlock/Imei(BETA)
* First In World SGH-T479B Flash/Direct Unlock/Imei(BETA)
* First In World SGH-T746 Flash/Direct Unlock/Imei(BETA)
* First In World SGH-T589R Flash/Direct Unlock/Imei(BETA)
* 25 GB New File Uploading At Support.

Information OF I5700 EFS REPAIR
* Put Phone Download Mode
* Connect To Usb
* Select Port
* Press RESET DEFAULT EFS
* After Progress done phone will restart
* Connect phone uart or usb which u want
* Do Normal Imei Repair Operation.

ATTENTION ABOUT I9100G:
This Phone have 2 Different hardware one for Europe one for china never mixed coz if u write European hardware china firmware u can not turn European language and can be kill phones.

Medusa Box 1.2.3 - SE E10i IMEI, TA Repair, Unlock for a free & more!
Medusa Box v1.2.3 is out! We have added word's first FREE IMEI Repair, word's first FREE Full Security Repair (TA Repair) and FREE Sony Ericsson E10i Unlock (no server, no credits, no queues, no limits).
Also we have added support for Samsung SC-02B, Samsung SCH-W910, Huawei U8160, Vodafone 858 and ZTE Racer!
Medusa Box v1.2.3 Release Notes:
Added support for the following phone models:
Sony Ericsson E10i – added Unlock (via TP) and world's first IMEI Repair and Full Security Repair (TA Repair)! Absolutely FREE (no server, no credits, no queues, no limits)!
Samsung SC-02B – added Dead Boot Repair, Read/Write/Erase Flash.
Samsung SCH-W910 – added Dead Boot Repair, Read/Write/Erase Flash.
Huawei U8160 – added Dead Boot Repair, Device Full Repair.
Vodafone 858 – added Dead Boot Repair, Device Full Repair.
ZTE Racer – added Dead Boot Repair, Device Full Repair.
Medusa Box Flasher v1.0.1 Release Notes:
Added support for the following phone models:
Sony Erricsson S0-01B – released Write Firmware, Read/Write/Repair TA.
Sony Erricsson E10a – released Write Firmware, Read/Write/Repair TA.
Sony Erricsson E10i – released Write Firmware, Read/Write/Repair TA.
Sony Erricsson E15a – released Write Firmware, Read/Write/Repair TA.
To resurrect these devices perform the following steps:
Solder JTAG cable to JTAG testpoints as explained in manual.
Make sure that correct model has been selected from model list.
Set Jtag speed to "Auto" (RTCK).
Select the "EasyRepair" mode.
Press the "EasyRepair" button and follow Wizard instructions.
After operation is successfully finished verify that new device appears in PC Device Manager to make sure that it has been recovered.
Desolder JTAG wires.

Micro-Box AIO V2.0.3.7
- ZTE N285
- SFR STARNAUTE
- ZTE G-S213
- ZTE G-S203
- ORANGE RIO II
- ORANGE RIO 3G
- VODAFONE 553
- VODAFONE 945
- ZTE RAISE
- SFR 522
- TELSTRA Smart Touch T3020

ORT-JTAG - New Models [ CDMA and GSM ]
Description :
Huawei U3100 Repair Boot
Sungil SXC-1080 Repair Boot
HTC Wildfire ( HTC Buzz ) G8 / Repair Boot / Unlock / IMEI Change
What's New in ORT Plus V1.66 ?
HTC Wildfire S Unlock Updated
Sungil SXC1080 Supported [MSM6025]
MSM6025 Bypass code added
Released Stuffs :
ORT Plus V1.66
HD7 Repair File Block Size arranged [Bugfix]
HTC 7 Mozart ROM Uploaded
Huawei U3100 Repair File
Huawei U3100 JTAG Pinout
Huawei U3100 FULL Flash RAW Dump
HTC Wildifre ( HTC Buzz ) G8 Repair File
HTC Wildifre ( HTC Buzz ) G8 JTAG Pinout
HTC Wildifre ( HTC Buzz ) G8 FULL Flash RAW Dump
Sungil SXC1080 FULL Dump
Sungil SXC1080 JTAG Pinout
Huawei U8230 Full Flash RAW Dump
Samsung GT-I9100 Repair Video

RIFF JTAG - HTC Desire Z (HTC Vision) Update

Added support for HTC Desire Z (HTC Vision)
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

Octopus Box Samsung v1.1.2

Added new features to a wide range of Samsung cell phones!
Octopus Box Samsung Software v1.1.2 Release Notes:
GT-I9000 – added Repair IMEI, Read/Write NVM.
SGH-I897 – added Repair IMEI, Read/Write/Repair NVM.
SGH-T959 – added Repair IMEI, Read/Write/Repair NVM.
SGH-T959v – added Repair IMEI, Read/Write/Repair NVM (test mode).
SHW-M110s – added Write Firmware.
SCH-W420 – improved Write Firmware, new firmware with file system rebuild option added to the support area.
SCH-W770 – improved Write Firmware, new firmware with file system rebuild option added to the support area.
SPH-W4200 – improved Write Firmware, new firmware with file system rebuild option added to the support area.
SPH-W5700 – improved Write Firmware, new firmware with file system rebuild option added to the support area.
SPH-W7100, SPH-W5700, SPH-W2700, SCH-W550, SPH-W5900, SPH-W7700 – added Unlock for one new firmware version.
Improved Write Firmware for Android phones (GT-I9000, SGH-I897, SGH-T959, SGH-T959v, SHW-M110s) and added Repartition files (PIT) support to the Firmware converter.
Octopus Box team is endlessly grateful to customers who were actively involved in improving this software.

Hyper Box Update Ver 2.30
New features:
[MTK] Support MT6252 PCT serial flash
[MTK] boot3.1108 improved
[SPD] IMEI rebuild improved
MISC] Support Serial Flash 4KB format operation
[All Chips] Support new serial flash memory:
SF_SST26VF016
SF_SST26VF032
SF_SST26VF064
SF_SST26WF080
SF_SST26WF016
SF_SST26WF032
SF_SST26WF064
SF_MX25U8035E
SF_MX25U1635E
SF_MX25U3235E
SF_MX25U6435E
SF_EN25S32
SF_W25Q32DW
SF_W25Q64DW
SF_FM25Q32
SF_W25Q64CV
SF_W25Q32BV
SF_EN25S64
SF_GD25Q16
SF_GD25Q32
SF_GD25Q64
All Old Bug fixes:
1.[MTK] Fix the serial flash ID detection
2.[MTK] Fix MT6252 boot fail
3.some UI bugs fixed

Polar box 2 : v2.72 Third step with huawei Gxxxx : 10 World First
Hi to all,
This is the last update for PolarBox2 customers :
••••••••••••••••••••••••••••
PolarSuite Update v2.7.2
PandaSuite Update v1.4.1
PolarSAT Update v1.3.3
••••••••••••••••••••••••••••
HUAWEI PHONES
* Huawei G3501 ( World First !!! )
* Huawei G7600 ( World First !!! )
[+] Unlock via IMEI CALCULATION (not needs cable)
[+] Unlock via cable (Read Codes)
[+] All firmware versions supported
[+] Process takes 10 credits (server online needed)

* Huawei G20 ( World First !!! )
* Huawei G6608 ( World First !!! )
* Huawei G6620 ( World First !!! )
* Huawei G7210 ( World First !!! )
* Orange Panama ( World First !!! )
[+] Added Unlock via IMEI CALCULATION (now not needs cable)
[+] All firmware versions supported
[+] Process takes 10 credits (server online needed)

ZTE PHONES
* Movistar Match ( World First !!! )
* ZTE X632 ( World First !!! )
* ZTE R236
* TMN Script 23
[+] Unlock via IMEI CALCULATION (not needs cable)
[+] All firmware versions supported

ALCATEL / VODAFONE PHONES (MTK Platform)
* Alcatel OT-F122
* Vodafone V555 / OT-V555 ( World First Full Support !!! )
[+] Read Codes functions added for this models (no more FLASHING for unlock)
[+] Full extended READ CODES (5 levels added)
[+] Write function (Firmware, Language and Eeprom backup)
[+] Change language (via Flashing)
[+] Repair function (via Flashing)
[+] Reset Usercode (via Flashing or Format FFS)
[+] Working with baudrate up to 921.600bds
[+] Prepairing now Flashfiles for add to support

* Alcatel OT-216
* Alcatel OT-356
* Alcatel OT-380
* Alcatel Miss Sixty
[+] Read Codes functions added for this models (no more FLASHING for unlock)
[+] Full extended READ CODES (5 levels added)
* Alcatel OT-980 (Qualcomm android)
* Alcatel OT-981 (Qualcomm android)
[+] Fixed bug in server calculation, now must works (please report any problem)

BLACKBERRY PHONES (RIM Platform)
MEP-34870-002
MEP-04104-008
MEP-06041-012
MEP-06041-013
MEP-42490-002
[+] Added more HOT new MEPs for users !!
[+] For sure, all meps supported actually (best and easy BB code reader)
[+] Process as usual, needs internet connection
[+] All MEPs supported (248 mep files)

Other features and fixments :
[+] Released new version of RESELLER TOOL (actually is v1.2.3)
- Fix problem in create reseller accounts (now solved)
- Added new pricings for all licenses (updated with GOLD license conditions)
- Fixed some internal things and updated license description
- Direct Link : Http://www.polarbox2.net/downloads/ResellerTool.zip
[+] Fixed some cable descriptions in Alcatel module
[+] Fixed some problems with gold license (not allow unlock in active period)
[+] Added SET FACTORY in LG GS290 (allow to fix enter NCK problem)
[+] Added various Alcatel providers (for complete support)
[+] Fixed bug in OT-380 (not functions added)
[+] Disabled for OT556/557/756/757... boot forced (only allowed in MTK platform)
[+] Disabled for OT8xx series boot forced (not allowed in these models)

Z3X BOX Samsung 2g tool 3.5.0028 Update
New algorithm and new models
Samsung GT-C3011 - read codes, unlock, repair imei - only usb cable
Samsung GT-C3200 - read codes, unlock, repair imei - only usb cable
Samsung GT-S3550 - read codes, unlock, repair imei - only usb cable
Samsung GT-E2152I - read codes, unlock, repair imei - usb-uart cable
Samsung GT-E2230 - read codes, unlock, repair imei - usb-uart cable
Samsung GT-E2232 - read codes, unlock, repair imei - usb-uart cable
Samsung GT-E2330 - read codes, unlock, repair imei - usb-uart cable
Samsung GT-E2530 - read codes, unlock, repair imei - usb-uart cable
Samsung GT-S3310I - read codes, unlock, repair imei - usb-uart cable
Samsung GT-C3560 - read codes, unlock, repair imei - only usb cable
Samsung GT-C3750 - read codes, unlock, repair imei - only usb cable
Samsung GT-C3752 - read codes, unlock, repair imei - only usb cable

MICRO-BOX Update : ALCATEL NEAR 1000 NEWS PIDS + 3 NEW MODELS
Microbox_AIO_2.0.3.6 Uploaded to support
New models added:
- OT-585,
- OT-585D,
- OT-EASYMUSIC.
with ALL PIDs
+ near 1000 new PIDs ADDED

MXKEY/MXBOX v3.5 revision 1.4, Public-Release
NOTE: You will now need MXBOX HTI INTERFACE to use this update and all future updates
 

What is new added, changes and improvements:
MAIN
1. introduced HTI Firmware version 00.24
new in firmware:
- firmware accept SL3instant unlock activations for MXBOX
- bugfixed: BB5 security repair algorithm for RAPIDO new ASIC
- implemented WD2 and BTMCM flashing protocol
- implemented TIKU and MM(NAND) flashing protocol
please Update HTI by using "Update HTI" button or "HTIUpdate.exe"
2. improved: antivirus compatibility.
3. improved: daily update check routine.
4. improved: built-in downloader routine
- added: resume support
- bugfixed: handing big file size(more than 1G)
5. added: support for upcomming windows 8(windows developer preview) support.
6. added: Detailed 'LastError' message window when No Security Dongle Detected
7. added: Detailed HTI identity(boot & fw version, serial) on connect.
New Application released:
MXKEY - Fire Agent(fire.exe)
it's brand new support tool and firmwares download support client
1. Using shared configuration with corresponding module,
simplify the needs to download/update firmware file.
2. Working in sync mode with modules for better usage.
3. using built-in downloader with resume support.
Supported services:
1. Nokia firmware, along with latest firmware notification info
2. CDMA firmware, various vendor(Alcatel, Haier, Huawei, LG, Nokia, ZTE)
3. more services to be added at the future
Nokia Tool
- important informations (Asic ID, ROOT KEY HASH, UEM Imei) now highlighted (beginner friendly).
- added: BB5 security repair function for RAPUv2 phones (beta testing)
- added: Verify Secure Data at 'Read SL3 Hash'/'Read Phone IDs',
(used to verify if secure data readed from the phone is valid to make sure
the hash readed by software(both USB/FBUS) is 100% correct)
- added: "Fire Support" menu in module`s options.
- added: support to load variant definitions created by fire.exe
- added: Spesified window dialog when card is busy/used by other module to fire.exe, sl3u.exe.
- added: support to convert log to other third party format to SL3BF module (sl3u.exe)
- added: new definition to 'phoneIdentity.ini.default'
- added: flash loader version 11.24.000.3 to setup
- added: RPL backup list load at scan (used for "Write Rpl' with 'Use RPL file' ticked)
- added: PM backup list load at scan
- improved: module initialization.
- improved: 'phone definitions loading' at first load.
- improved: 'HTI Auto BSI(SoftTMA)' set.
- improved: file/image version check routine.
- improved: Reboot after flash mode
- improved: WD2 flashing with HTI
- bugfixed: BTMCM flashing bug with HTI
- bugfixed: No Security Dongle Detected when HTI connected with phone
(HTI power switched off on load)
- bugfixed: RAPIDO New Asic security repair function
CDMA Tool
- added: "Fire Support" menu in module`s options.

Infinity-Box: 12 new models supported (MSW and SPD CPU)
Intex-IN6622, IN6622i, IN6623, IN6660, IN5000, IN1212, IN1220 (MSW CPU):
- flasher software uploaded into Infinity-Box support area
- flasher manual uploaded into Infinity-Box support area
- flash files uploaded into Infinity-Box support area
Intex-IN2060, IN3080E, IN4470, IN4470N (SPD CPU)
- flash files uploaded into Infinity-Box support area
Fly-E110 (SPD CPU)
- flasher software uploaded into Infinity-Box support area
- flasher manual uploaded into Infinity-Box support area
- flash files uploaded into Infinity-Box support area

CycloneBox SL3direct and new MEP-17568-003 Firmware v01.77 Released
Hi, firmware v01.77 was just loaded to server.
Added new Blackberry MEP-175683-003 (MTS Moscow, North-West GSM, KB Impuls BeeLine) and
Added free SuperBB5 (sl3direct) routines.

RIFF JTAG - Samsung updates
07.10.2011 Samsung Galaxy II, OMAP4430 version supported (Samsung i9100G, Samsung i9108)
Added support for Samsung Galaxy II, OMAP4430 version supported
Please click "Check for Updates" Button in RIFF JTAG Manager to download and install new files.

RIFF JTAG - Latest news and Updates !
Released updates :
RIFF JTAG – Samsung S7330 Unbrick, Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – CDMA Samsung B209 Breeze Supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung Focus (i917) Unbrick, Dead boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG – Samsung i997 infuse 4g Unbrick, Boot repair supported « RIFF Box – JTAG Revolution
RIFF JTAG -CDMA Samsung F619 supported « RIFF Box – JTAG Revolution
RIFF JTAG – JTAG Manager v1.36, RIFF Box firmware v1.27, GDB Server v1.05 released « RIFF Box – JTAG Revolution
Bug fixes :
Samsung_M110S.dll
-------------------------------------
- pinout picture was corrected
Samsung_I9100.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
HTC_DesireHD.dll, HTC_DesireS.dll
-------------------------------------
- DCC Loader now will report eMCC Card product name
- Resurrection interface was changed to a more flexible one
Samsung_I917.dll
-------------------------------------
- added resurrection data for phone revisions with 2KB-paged NAND chips

ORT-JTAG - HTC HD7 [Schubert] ,HTC Desire,HTC Nexus Repair ,Unlock and IMEI Repair
HTC Passion / Nexus One Repair Boot Unlock / IMEI Repair
HTC Desire Repair Boot / Unlock / IMEI Repair
HTC HD7 Schubert Repair Boot / Unlock / IMEI Repair
ORT Plus V1.65 Released
Spanish Language Pack Released for ORT Plus
What's New in ORT Plus V1.65 ?
Qualcomm MSM7600 New CPU ID : 0x20100E1 Added
Qualcomm QSC6075 New CPU ID : 0x120FA0E1 Added
ONENAND Flash ID : 0x004D00EC Added
NOR Flash ID : 0x22500001 Added
Blackberry 9530 Halt Method added
Fast Mode for MSM8x55 [eMMC]
Released Stuffs :
HTC Passion / Nexus One G5 Repair File with Bad Block Handling
HTC Passion / Nexus One G5 JTAG Pinouts
HTC Passion / Nexus One G5 Repair Guide
HTC Passion / Nexus One G5 Full Dump
HTC Passion / Nexus One G5 ROM
HTC Desire G7 Repair File with Bad Block Handling
HTC Desire G7 JTAG Pinouts
HTC Desire G7 Repair Guide
HTC Desire G7 Full Dump
HTC Desire G7 One ROM
HTC Schubert HD7 Repair File with Bad Block Handling
HTC Schubert HD7 JTAG Pinouts
HTC Schubert HD7 Repair Guide
HTC Schubert HD7 Full Dump

JTAG Manager Version 1.36, RIFF Box Firmware v1.27 Released,Tegra 2 Support
- added fast presets for automatic selection of settings for most common operations on DCC Read/Write page
For this click Settings by Code button and select a desired preset from list and then click Apply Settings.
For example if user selects "Write Full Image into NAND memory" the valid settings on the DCC Read/Write page
for writting full images into devices with NAND memory will be automatically selected
- fixed serious bug which caused resurrector DLLs which do upload data into RAM to upload broken data
For example DLLs which start Downlad Mode directly use this feature.
- added feature to accept text name of memory chip from DCC Loader and display it (currently used to display eMMC memory product name)
- fixed bug for resumming interrupted DCC Read: ifvcurrently cached file size was greater than > 2GB
(that is if read was interrupted on point when there was already more than 2GB of data read) the new reading data was not appended to the readout file end, but instead the file was corrupted.
- fixed bug for saving big files (after reading on DCC Read/Write page): if size exceeded 0x7FFFFFFF bytes JTAG Manager show no free disk space error.
- added TEGRA2 chipset selection in the Target list
- fixed an issue with the resurrection progress bar: in some cases during resurrection operations the progress bar would always stay at 0%.
Firmware 1.27
---------------------------
- added TEGRA2 debugging support (dual-core Cortex-A9)
- added new breakpoint type: "address mismatch" which allows geniune single-stepping on Cortex-A8,A9 (CoreSight) targets
(thus GDB Server can now perform low-level single step commands)

NCK Dongle V.1.9.5 Released
Added:
Support for ZTE MTK Platform:
N285
Support for ZTE Android:
ZTE STARNAUTE ANDROID EDITION
ZTE T3020
Support for Vodafone MTK Platform:
Vodafone455: VDES1, VDFJ1, VDHR1, VDPT1, VDLU1, VDNZ1
Support for Alcatel MTK Platform:
OT213: PMPT1
OT506: C9FA1, VDFJ1, ALNL1, AVCR1, VRGB3, MVGTA, C9AC1, WFUS1
OT602: PMPT5, DCPC1, CFMK1, NRFR1, ALDE1, ALRU1, AVCR1, MNZA1, TNHU1, PMPT3, DCPC1, CFMK1, OBGB3, CECO3, AVPE1, AVCL1, UFMX1
OT606: LXSV1, TLGT3, TUAU1, RGAM1, ALIE1, JDFJ5, JDFJ1, SYUS1, RGDO1, ICCR1, PSAR1, CIJM1, LCCN1, TBUS3, AVCL1, RGRE3, AVGT1, AVPE1, TLUY1, VMVE3, SDUSH, VDFJ1, RGCH1, TBHU1, TLPE3, AVSV1, AVNI1, DCFJ1, BFVN1, SVRU1, RGCH2, P2TH2, ALNC1, PAHU2, RGTE1, RGKE1, TIVE1, M1TE1, TLVE3, ALBY1, JDTO1
OT710: AEUY1, ALRO1, SVRU1, BENL1, ADGB1, WNIT1, CFMK1, ALES1, ALZA1, DCPC1, VDKE2, TLCL3, ALCN1, VDFJ1, ALNC1, VDMK1, DCFJ1, ALGB1, TIVE1, CSRO1, VVBG1, ALBE1, MNZA1, ICCR1, ALKW1, ALEU0, JDFJ1, TLPE3, BFVE1, PVIL1, TLGT3, LCAR2, LXSV1, SFRE1, LCCN1, ALHK1, C4EC1, C5HK1, SKID1, RGAM1
Some other Bugs Fixed.

Polar 3-Card Upgrade Tool v1.0.2 Ready (Only For Metal Box Users)
IMPORTANT (for all PolarBox2 Metal customers)
Hi to all,
We released a new version for UPGRADER TOOL
Old version v1.0.1 not will work for upgrade your metal box, you must use v1.0.2
Here you have direct link : PolarBox2 Official Web site
PS: STILL ONLY 28 DAYS BEFORE METAL (WITHOUT DONGLE) WILL STOP ACCESS TO SERVER. SO NOT LOOSE TIME

XTC clip version "xtc-clip plus 2.1.1" released
If there are any problem with your internet connection, use the manual updater
What's new:
1. Faster BREW unlocking. Fixed the communication with the server for a faster response on the slow internet pc's.
2. HTC AQUA (HTC FREESTYLE ) (AT&T USA BREW PHONE) now added to supported devices.

RIFF JTAG - Samsung updates
Added support for Samsung Focus (i917) Unbrick

Cyclone BOMB!!! RAPUv21 Unlock/SD Repair/RPL Back/Downgrade/SecAnalys/Standalone SX4!
Hi, latest bomb for Cyclone Box is ready
Update is 100% free and standalone for CycloneBox users;-)
- Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry. We recommend FFS Pro2 Cables
- Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones
- Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones
- Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones
- Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones
- Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones
- Supported interfaces: USB and FBUS
- Small bug fixes, i.e. PM protection is now unticked by default

Axebox Generic Fast Andriod Unlocker Released
Generic Fast Android Code Reader Beta-V1
World's Fastest Code Reader
> READY
> BoxSerial: 4E4XXXXX
> Please Wait..
> beginning unlock
> Radio Ver: 5.11.05.27
> CID: O2___001
> Carrier: O2-UK
> ModelID: PB9920000
> Serial#: HT08YPL07343
> HBoot Version: 0.93.0001
> Device Identified,
> Start Reading Unlock Code
> Unlock Code:89382095
> Operation Time: 36 secs
Use normal HTC drivers

Polar box 2 : v2.71 Ready (Second step with huawei Gxxxx code reader and more)
Hi to all,
This is the last update for PolarBox2 customers :
-=-=-=-=-=-=-=-=-=-=-=-=-
PolarSuite Update v2.7.1
PandaSuite Update v1.4.1
PolarSAT Update v1.3.3
-=-=-=-=-=-=-=-=-=-=-=-=-
HUAWEI PHONES
* Huawei G7210 (Exclusive World First !!!)
* Orange Panama (Exclusive World First !!!)
[+] Added READ CODES via calculation
[+] Process totally safe (no patch, no flash, etc ...)
[+] All firmware versions supported
[+] UserCode / Factory Settings (added secuences)
[+] Process takes 10 credits (server online needed)
 

* Huawei G20
* Huawei G5500
* Huawei G6600
* Huawei G6608
* Huawei G6620
[+] Modified connection, changed ReadCodes process to RJ45
[+] Added support for some patched firmwares (not allow to connect via USB)
[+] Modified instructions in screen

HTC PHONES (Android and Windows Platform)
* HTC Sensation
* HTC Evo 3D
[+] Flashing function added
[+] TempRoot function added
[+] Fixed bug in some HTC Desire versions
[+] Fixed bug checking license/credits for some HTCs
[+] Added new TempRoot for some new HTC familys (Pyramid/Shooter)
[+] Fixed other internal problems

ALCATEL / VODAFONE PHONES (MTK Platform)
* Alcatel OT-255D (Dual phone)
* Alcatel OT-355D (Dual phone)
[+] Read Codes functions added for this models (no more FLASHING for unlock)
[+] Full extended READ CODES (5 levels added)
[+] Write function (Firmware, Language and Eeprom backup)
[+] Change language (via Flashing)
[+] Repair function (via Flashing)
[+] Reset Usercode (via Flashing or Format FFS)
[+] Working with baudrate up to 921.600bds
[+] Prepairing now Flashfiles for add to support

ALCATEL / VODAFONE PHONES (MTK Platform)
* Alcatel OT-455
[+] Completed all Providers for this model (+6 added)
[+] Now all versions supported

ZTE PHONES
* SFR Starnaute (Android)
* ZTE N285
[+] Added unlock to this models (via Imei calculation)