SagemEG_V19.3 released
- minor bug fixed;
- added support for new models and FW`s:
ZTE
- A136+, EV-VI-P108A10FM(S)V1.0.0B03;
- A302, EF-P108A19(S)V1.0.0B01;
- A302EF-P108A33FM(S)V1.0.0B05;
- S308, EFS-HT-COMCEL-P108A32FM(U)(S)V1.0.0B02;
- S318, EF-CI-ORANGE-P108A32FM(S)V1.0.0B01;
- S320, ES-SR-TELENOR-P108E10(S)V1.0.0B06;

HUAWEI
- HUAWEI G2200CV100R001ZWEC50B102SEC;
- HUAWEI G2201CV100R001PAKC96B102SEC;

Mi Fone
- Mi-206e, 04.17.00:18.26.16:08.07.00:X3B_32_TIGO:ULC2G;
- Mi-208, X100V1.1.0B11-GPRS-TIGO-S7-TXD-EFPS-SIM;
- Mi-Q+, Q100_GPRS_TIGO_V1.1.0B20-S7-TM-1S-FB-EPFS-SI;

EMPORIA
- EMPORIA_V170_R024_091029_ED001GE
-A1_Telekom_Austria
- added new On-line NCK calculator for ZTC Sp50
- added Server based NCK calculating for some HUAWEI phones (under test)
- -G1101 - all FW`s;
- -G1158, REL_P1.2TB04V02.01;
- -G2158, REL_P1.1EN01V01.03.
 

RIFF JTAG Updates - HTC Ozone/Chief, JTAG Manager v1.29 and more
HTC Ozone XV6175 (HTC Chief) Unbrick, Boot Repair, Unlock, IMEI Repair, CID Update supported
Resurrecting HTC Chief is easy:
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 0.44.0000 SPL version.
Additionally, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘CEDA10000′.
As well, you can change CID – for this make sure ‘Repair Custom ID’ field is checked in the Resurrection Guide dialog.
To resurrect HTC Chief:
Solder JTAG cable to HTC Chief JTAG pads;
Make sure HTC Chief is selected in the list of models;
Insert battery and connect USB Cable;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

31.03.2011 JTAG Manager v1.29, RIFF Box Firmware v1.21 released
JTAG Manager 1.29
—————————
Fixed bug with plugins managing in case there is more than 1 plugin DLL available;
Currently selected plugin is remembered now and will stay on next startups;
Fixed Access Violation error during software startup in case there is none resurrector DLL present;
Added Reset Method selection feature for more precise reset operation when Custom Target Settings is active;
Updates manager & Updates tracking were completely reworked, and now are based not on the system time but on file’s hashing.
Thus since now on the JTAG Manager’s installation folder can be copied/moved/re-installed (whatever else) without need to re-download full set of files again.
(SDK): more functions are now available (exported) for future Resurrector DLLs;
Many cosmetic changes;
FINALLY: “healed” the optimized DLL loading scheme:
User shall see: “Found and Initialized: XXX New and YYY Old External Repair Pack(s)” where XXX must be always non-zero only on first startup after there were new DLLs downloaded from the support.
On following JTAG Manager startups XXX shall be always equal to zero (!!!)
For example, after downloading 3 more new DLLs while there were 100 Resurrector DLLs already installed, after JTAG Manager restarts user shall see:
Found and Initialized: 3 New and 100 Old External Repair Pack(s)
on next and all following restarts user shall see:
Found and Initialized: 0 New and 103 Old External Repair Pack(s)
Re-worked balloon hints system – Own (not windows’) balloons are shown, so no matter now what are the windows’ tray icon settings are.
Added balloon hints for cases when target is not detected, error code 0×45, Device Id = 0x000000E1.
Don’t forget that balloons hints can be switched on or off from the DCC Read/Write page – click “Notifications…” and select”For Advanced Users” page to see settings
- JTAG Manager now has new Icons http://www.jtagbox.com/wp-includes/i...icon_smile.gif
- Improved JTAG Manager restarting during updating itself
Firmware 1.21
—————————

Added RX-polling feature (debugger-to-target) for PXA3XX DCC transfers.
RIFF BOX firmware is able now to wait (if resurrector DLL will request so) for PXA3XX target to be ready to accept
next packet over DCC: this feature slows down a little the JTAG-to-Target DCC
transfers but guaranties no packets loss for slow clocked targets;

31.03.2011 RIFF Data Exchange Plugin 1.00 released
First release of the RIFF Data Exchange Plugin: please download it, and then select it on Usefull Plugins page in the JTAG Manager to read short description about the plugin’s abilities. In short it allows RIFF BOX users to share and use Full Image files in centralized manner without need to waste a lot of time for browsing countless forums. Because of big sizes of Full Image files, we don’t host them, instead users share links to file sharing servers where the files are actually uploaded. (like megaupload.com, rapidshare.com and others) You can browse existent links for required image file or share your image file (by sharing a http link) to help other RIFF BOX users.
If you share image file please take attention to carefully fill file details so for other people this to be an easy task to search for required file (link)
If you used link to download file and found it good or bad or link to be broken – please Rate this link so other users see the usability of the link.
At the moment of first release of this plugin there are already few links shared so you’ll catch the idea fast.
Please click “Check For Updates” button in order to download and apply new files. Closing all running application before starting update process is recommended.

DC-Unlocker V0616 Huawei UM840, U3200, U7520, ZTE F160
Added :
Phones:
ZTE F160
Huawei UM840
Huawei U3200
Huawei U3200-9
Huawei U3209
Huawei U7520
Modems:
Sierra Wireless AirCard 319U
ZTE MF658
Huawei E881e
Option iCON 452
Option GTM 351E
Customized Huawei E150 (Beeline) v. 11.609.82.02.161
All Sierra Wireless unlock changed to unlimited for dongle users.

SmartMoto v4.18 & S-Card v3.08. Direct unlock of EX112,EX115,EX122,EX128
Dear users,
Please let us introduce new version of SmartMoto v4.18 and S-Card v3.08
With this release we present the following options.
World's Exclusive Direct unlock for the following Motorola MTK models:
EX112
EX115
EX122
EX128
All firmware versions are supported. With our direct unlock solution, the cell phone won’t get locked again after reboot, unlike when unlocking with the server codes.
Released Read codes, Format FFS and Read Backup options for the Alcatel models based on MT6253 CPU Detailed unlock manual and cable pinouts available at support section of Smart-Clip official web site

SPTBOX DELUXE 11.0.1 RELEASED
* First In World SGH-I917 Unlock/Imei
* First In World GT-S3850 (Corby 2) Flash/Unlock/Imei
* First In World GT-B5310R Flash/Unlock/Imei
* First In World GT-C3303I Flash/Unlock/Imei
* First In World GT-E2120I Flash/Unlock/Imei
* First In World GT-E1083C Flash/Unlock/Imei
* First In World GT-S3710C Flash/Unlock/Imei
* First In World GT-E2330C Flash/Unlock/Imei
* First In World GT-I9023 (Galaxy Nexus) Flash
* First In World GT-I9020 (Galaxy Nexus) Flash
* First In World SCH-I559 Unlock/Imei
* First In World SCH-I909 Flash/Unlock/Imei

POLAR BOX2 : v2.59 READY : [HOT : HTC ANDROID, LASTEST BB MEPS, LG, MODEMS]
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
PolarSuite Update - Version v2.5.9
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
HTC PHONES ( Android and Windows platform )
* HTC Hero
* HTC Hero100
* HTC Hero130
* HTC Hero200
* HTC Hero A6265
* HTC Hero A6277
* HTC Hero A6288
* HTC Legend
* HTC Legend A6363
* HTC Legend A6365
* HTC Buzz
* HTC Wildfire
* HTC Wildfire A3335
* HTC Wildfire A3333
* Verizon HTC Hero
- Unlock (via ReadCodes)
- Process totally safe
- Fixed some info showed in screen
- Improved connection process and stability
- Added extra info in Android HTC booting (Platform, HwId, Bootloader and Baseband)
- Added some versions not supported, that gives error
- Fixed problem in OMAP read imei (before show 14 digits, now fixed)
- Working actually in flash, goldcard generator, factory unlock, etc ...

BlackBerry Phones
HOT MEPS ADDED
* MEP-06041-011
* MEP-08209-004
* MEP-09292-006
* MEP-09292-008
- Added some HOT new MEPs for users !!
- Process need internet connection

LG Phones ( Infineon platform )
* LG T300
* LG T310
* LG T310i
* LG T310N
- Read Codes (totally safe process)
- Reset Settings
- Rebuild imei (for testing purposes)

Modems USB ( Qualcomm platform )
* Vodafone K3765-Z (ZTE variant)
- Direct Unlock (via read codes)
- More models compatible will be added in the next updates

ORT-JTAG Samsung I728 Unbrick / Repair Dead Boot - Haier C6300 CDMA Repair Dead Boot
ORT Plus V1.33
Haier C6300 Repair Dead Boot
Samsung I728 Repair Dead Boot

Medusa box 1.0.2
added dead boot repair for LG P350, P350GO, Samsung Z300, Samsung U700 and ZTE MF626

Vygis LGI_1_89SD released.LG A110,T320e,T325 and KS365 added
New version - LGI flasher - unlocker v1.89SD is uploaded at support sites in LG section.
- Added support for LG A110,T320e,T325 and KS365.Flashes for them are uploaded also.

Infinity-Box: Doro, Alcatel, ZTE, Bird, UTStarcom models updated
.Doro-PhoneEasy-409s model supported
.Alcatel-OT223 model supported
.Metfone-Closer-desktop-phone model under test
.Spice-S5110 included in list
.T-Mobile-Unity model supported
.ZTE-i799 model supported
.Lava-KKT34 included in list
.Bird-K302 model supported
.UTStarcom-GPFM1238CL model supported
.firmware database updated
.new flash files uploaded in support area

Z3X BOX LG News. LG Sgold3 Tool 3.0 beta Update. A2 LG models added
SGOLD 3.0 Update LG_Sgold3_Tool_3.0_beta
PMB8877 Phones Support Improved , KP500 GS290 etc...
Interface now are multiplatform capable ( tabs )
Added SEMC platform phones :
- KF750GO support (Flash, Unlock)
- KF755 support (Flash, Unlock)
- KF755C support (Flash, Unlock)
- KF755D support (Flash, Unlock)
- KF757 support (Flash, Unlock)
- KF758 support (Flash, Unlock)
- CF750 support (Flash, Unlock)
- GD580 support (Flash, Unlock)
- KT520 support (Flash, Unlock)
- KT525 support (Flash, Unlock)
- KU580 support (Flash, Unlock)
- TU750 support (Flash, Unlock)

HTCDongle 1.3 Released- HTC Flasher added
* Added FLASHER: firmware upgrade/downgrade for HTC Desire & Bravo
Flasher ModelID dependent : ( for not flash wrong flash )
You can flash different CID inside phone without problem.
PB9920000
Uploaded to Support
PB99IMG.zip
PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28 U_4.06.00.02_2_release_126984_signed.zip
PB99IMG_Bravo_Virgin_Mobile_1.23.351.1_Radio_32.36 .00.28U_4.06.00.02_2_release_128941_signed.zip
RUU_Bravo_Froyo_HTC_WWE_2.09.405.8_Radio_32.43.00. 32U_5.09.00.20_release_140022_signed.zip
RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.0 0.32U_5.09.05.30_2_release_142828_signed.zip
RUU_Bravo_HTC_Europe_1.15.405.1_Radio_32.30.00.28U _4.05.00.11_release_121684.zip
* 600 MO of Desire_bravo flashfiles added to support ( total 1.6 GB need to be uploaded)
* Added 2 kernel version for Wildfire with Android 2.2.1
* Small corrections done

Universal Box 2.9.1 Added Nokia SL3 New HASH unlock
New hashes now supported means you can unlock more phones with Universal Box and SL3 Credits
NEW HASHES:
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
Hashs are Supported Same like others.
New Supported Models are:
New RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
New RAP4 Based: 3710, 5330, 7230, 6303i, X3

GPGDragon Freware 1.20 released! more supported phones on your GPGDragon
GPGDragon Freware 1.20 released! more supported phones on your GPGDragon!!
1.slove the gpgdragon Freeware computer language error
2.packing the GPGDragon V2.03 Full add in it
3.GPGDragon Firmware Update to Ver 1.53
3.add the pinout for
3D-Sound,A308,A380,A898,VBCect-T689,Cect-T918-WatchPhone,Cect-V8,Cect-V68,Cect-V70,Cect-V98,
Cect-V180,Cect-V180-2sim,Cesim-A510,Changxing-A868+,Coolry-2008,
Coral-620,Cosun-289,Cosun-638,Cyfon-C800i,Daxian-X999,DBest-VT880,
Desay-M888,Digibee-G240,Dirland-M881,Dorado-6700C,Dorado-D600,
Doro-PhoneEasy-345gsm,Dsney-Q7,DualGsm_2x6pin,Dualsim-RM217,Dubao-538,
Dubao-558,DX-N6188,E71i-E,E206,Eagle-E52,Enimac-QM8200,Evertek-E300,
F838,Fly-DS100,Fly-DS150-1,Fly-DS150-2,Fly-DS150-3,Fly-DS180,Fly-DS210,
Fly-DS400,Fly-MP100,Fly-MX200,Flynet-F007,Fly-V60,Fly-Ying-F003,
Fly-Ying-F003_v2,Funker-F803DS,G95,GFive-E71y,GFive-U800,GFive-U800_v2,p
GFive-U808,GFive-U808_v2,GFive-U808_v3,G-Five-U909,Giorgio-Arnani,
G-Tide-G15,G-Tide-G28,*****,*****-G600,Haier-Z1000,Hello-HL2801,
Hello-Kitty,High-resolution-digital-phone,Huawei-ETS388,Huawei-G5010,
Huawei-G5730,Huawei-G6600,Huawei-G6610,Huawei-G7002,Huawei-G7002_v2,
Huawei-G7002_v3,Huawei-T156,Huawei-T161L,Huawei-T202,Huawei-T208,
Huawei-T330,Huawei-T565,Huawei-uart
and more

SL3 New HASH unlock BY Universal Box
Today we have released our web based SL3 unlock for all new HASH BB5 phones. We have set up a dedicated server park for these models. The current wait time is approximately 5 minutes for these unlocks. 

Lets see how it works:
You can use Advance Box, Cyclone Box, MX-Key (Dejan's format going to be added tonight) to read SL3 log of your phone and then login at universalbox.com. Under 'SL3 queue' menu you can browse your SL3 log file and upload to the server with a single click. Our servers will do the rest.

PolarSuite Update - Version v2.5.8
HTC PHONES ( Android and Windows platform )
* DoCoMo Pro HT-01A
* Dopod 310
* Dopod A3288
* Dopod C500
* Dopod C720
* Dopod C720W
* Dopod C730
* Dopod C750
* Dopod C800
* Dopod C858
* Dopod D600
* Dopod D600 Action
* Dopod Magic A6188
* Dopod P660
* Dopod P800
* Dopod P800W
* Dopod S1
* Dopod S900
* Dopod Touch Viva
* Emobile Emonster S11HT
* HTC ADR6200
* HTC ADR6275
* HTC Arte100
* HTC Arte110
* HTC Bravo
* HTC Citrine
* HTC Click
* HTC Desire
* HTC Desire US A8183
* HTC Diam100
* HTC Diam400
* HTC Elf100
* HTC Elfin
* HTC Excalibur
* HTC Fuze
* HTC Hernan
* HTC Kaiser
* HTC Kaiser 100
* HTC Imagio
* HTC Juno
* HTC Niki
* HTC Nova
* HTC Oxygen
* HTC P3300
* HTC P3301
* HTC P3400
* HTC P3400i
* HTC P3401
* HTC P3450
* HTC P3470
* HTC P3700
* HTC P3701
* HTC P3702
* HTC P4350
* HTC P4351
* HTC P4550
* HTC P4600
* HTC P5500
* HTC Phoe100
* HTC Pure
* HTC Rhodium
* HTC S310
* HTC S320
* HTC S620
* HTC S621
* HTC S710
* HTC S711
* HTC S730
* HTC Saga
* HTC T222X
* HTC T535X
* HTC T727X
* HTC T737X
* HTC Tattoo
* HTC Tilt2
* HTC TOPA100
* HTC Touch
* HTC Touch Diamond
* HTC Touch Diamond2
* HTC Touch Plus
* HTC Touch Pro
* HTC Touch Pro2
* HTC Touch Viva
* HTC Triumph
* HTC TyTN II
* HTC Victor
* HTC WhiteStone
* HTC XV6975
* HTC XV6175
* O2 Xda Atmos
* O2 Xda Cosmo
* O2 Xda Ignito
* O2 Xda Terra
* Orange & HTC Touch Diamond
* Orange SPV C100
* Orange SPV E650
* Qtek G200
* Rogers & HTC S621
* SFR S710
* SoftBank X03HT
* SoftBank X05HT
* SoftBank X06HT Desire
* SoftBank X06HT II Desire
* SPV E600
* SPV M650
* Swisscom & HTC Touch Diamond
* Swisscom XPA v1415
* T-Mobile Dash
* T-Mobile MDA Basic
* T-Mobile MDA Compact III
* T-Mobile MDA Compact IV
* T-Mobile MDA Compact V
* T-Mobile MDA Mail
* T-Mobile MDA Touch
* T-Mobile MDA Vario III
* T-Mobile MDA Vario IV
* T-Mobile MDA Vario V
* T-Mobile Shadow
* T-Mobile Wing
* T-Mobile Wing II
* Ted Baker Needle
* Verizon Ozone
* Verizon XV6850
* Verizon XV6875
* Verizon XV6950
* Virgin Lobster 700TV
* Vodafone v1415
* Vodafone v1615
* Vodafone v7505
* Vodafone VDA V
* Vodafone VPA Compact V
* VPA Compact IV
* VPA Touch
* Xda Diamond Pro
* Xda Diamond2
* Xda Orbit
* Xda Serra
- Unlock (via ReadCodes)
- Process totally safe
- More updates will come in the next days ...
Other info :
- New communication process for all supported HTCs
- Goldcard calculator under progress, soon will be added
- This first release for testing purposes, please report problems in forum (as usual)

Modems USB ( Qualcomm platform )
* Huawei E1750
* ZTE MF190
- Direct Unlock (huawei via read codes)
- More models compatible will be added in the next updates

SOME FIXMENTS/IMPROVEMENTS
- Improved connection in Alcatel OT-606 (now shows complete data of phone)
- Fixed booting with some versions of Alcatel OT-710 and OT-710D
- Fixed problem in booting some Samsung E1360/E2210B (and similar platform)
- Fixed MSL calculation in direct unlock in Samsung S3110/S3310 models
- Fixed problem with Motorola WX295 flashing procedure
- Added window in Alcatel TI phones for MEP Repair (old and new method)

Z3X BOX LG News. LG 2/3G Tool 2.1.6 Update
Added:
- SH170 new version SW170705
- SU410 new version SU410904
- SU600 new version SU60080
- SU600 new version SU600809
*Fixed e-gold flash files select in new interface.

Octopus Box v 1.7.7 - LG SU130, LG L01C added
Octopus Box v 1.7.7 is out! We have added support for LG L01C and world's first support for LG SU130!
Octopus Box v 1.7.7 Release Notes:
SU130 – added world's first Direct Unlock, Safe Write Firmware, Repair Bluetooth address, Read / Write / Repair NVM
L01C – added Direct Unlock, Repair Security, Read / Write / Repair NVM
KH3100 – added Direct Unlock for KW310904 and KW310910 versions
Added extended manuals for a wide range of models

Vygis GQ_1_74SD - LG P350 and P350GO
New version - LGQ_1_74SD is uploaded at support sites in LG section.
- Added full support for LG P350 and P350GO.For unlock,IMEI,BT and security repairing
phone must be flashed with special "P350AT_V10_FOR_UNLOCK" flash.

NsPro v6.0.8 released
-Added S5560 support.
-Fixed S5620, B5310 code reading bugs.

Micro-Box AIO V1.0.8.9 : By IMEI : ZTE - Zong - TMN - Vodafone
IMEI CODE CALCULATOR UPDATE:
- VODAFONE 1230,
- VODAFONE 1231,
- TMN 1210,
- Zong R221,
- Zong R231,
- ZTE Z533,
- ZTE R225,
- ZTE T202,
- ZTE G-N 290,
- ZTE 811,
- ZTE BLADE,
- ZTE San Francisco,
- ZTE Racer,
- ZTE Mercury,
- ZTE X850

Medusa Box v. 1.0.1
Added dead boot repair for LG SU130, LG KU4000, Samsung SPH-W8400, Samsung SCH-W560
Fixed repair files for Huawei U1000s and Huawei U120s

 

SmartMoto v4.17 Added direct unlock for the Alcatel MTK models based on CPU MT6235
Added direct unlock for the following Alcatel MTK models based on CPU MT6235:
OT-800 / VM800
OT-802
OT-806
OT-807
OT-808
OT-880
MissSixty MSX10
Released support for the Alcatel models based on CPU MT6235 with disabled unlock codes menu*
OT-880 (2FTGMX1 16f XR16PF11)
Developed IMEI repair solution for Alcatel OT-706
Released Restore backup option for the Alcatel and Motorola models based on CPU MT6235 with NAND flash memory type**
Implemented Save FFS to backup option. It allows to save full phone's file system (phone book, messages, user code etc) in the backup file
Improved work with NAND flash memory type. Bad blocks detection added
Resolved the issue with NAND flash memory type, 512Byte Page size
* In cases if unlock code request is blocked by service provider (handset doesn't ask / doesn't accept unlock codes).
** In order to restore backup file, the option “Write full raw backup” should be checked in. Backup file can be restored to the phone it was read from, only.
NOTE: For the Motorola EX-series models, backup files should be created with ‘Save FFS to backup’ option checked in

Genie Universal uGenie v 0.9 Released
New version of uGenie update package. What's new:
- Important bug fix regarding recovery mode
Download from http://www.genieprojects.co.uk/?file=kop3.php . To recover dead devices, tweet me @bphreaks

NaNo Box : Update V 1.3.9 READY
Added:
[SYSOL/SWIFT new sec] by NANO interface
Models:
F266
+ read all lock codes
[LG Infineon] by NANO Interface
Models:
GS290
GS290go
GS290n
GS290ngo
+ read all network lock codes
+ factory reset/phone lock code remove

Infinity-Box: ZTE, SFR, G-Fone/Aircel, Zonda, Nexian, NGM, QMobile, Spice, Karbonn
.ZTE-R221 with 8mb amd 16mb flash chip variants supported
."read unlock codes" operation improved
.SFR-261 model supported
.G-Fone-411 (Aircel) model supported
.G-Fone-466 (Aircel) model supported
.Zonda-ZMTN615 operations improved (unlock)
.Nexian-NX-T780 model supported
.Bess-VZ219 model under test
.Allview-S2-Guld model included in list
.NGM-Alittle model included in list
.NGM-BlackAngel model included in list
.NGM-Pixy model included in list
.NGM-Vanity model included in list
.Onda-N130T model included in list
.Spice-QT52 model included in list
.BBK-i2288 model included in list
.QMobile-Q73 model included in list
.QMobile-Q55 model included in list
.QMobile-M2 model included in list
.QMobile-F55 model included in list
.QMobile-F363 model included in list
.QMobile-F252 model included in list
.QMobile-F23 model included in list
.QMobile-F22 model included in list
.QMobile-F220 model included in list
.QMobile-E125 model included in list
.QMobile-T630 model included in list
.QMobile-T550 model included in list
.QMobile-Q99 model included in list
.QMobile-Q8 model included in list
.QMobile-Q88 model included in list
.QMobile-Q66 model included in list
.QMobile-Q63 model included in list
.QMobile-Q61 model included in list
.QMobile-Q55 model included in list
.QMobile-Q510 model included in list
.QMobile-Q3i model included in list
.QMobile-Q38 model included in list
.QMobile-Q37 model included in list
.QMobile-Q29 model included in list
.QMobile-Q28 model included in list
.QMobile-Q28i model included in list
.QMobile-Q27 model included in list
.QMobile-Q26i model included in list
.QMobile-Q266 model included in list
.QMobile-Q25 model included in list
.QMobile-Q25i model included in list
.QMobile-Q24 model included in list
.QMobile-Q21 model included in list
.QMobile-Q218 model included in list
.QMobile-Q213 model included in list
.QMobile-Q212 model included in list
.QMobile-Q20 model included in list
.QMobile-Q18 model included in list
.QMobile-Q126 model included in list
.QMobile-Q11 model included in list
.QMobile-Q73 model included in list
.QMobile-E195 model included in list
.QMobile-Q3i model included in list
.Sitronics-SMD-105 model included in list
.Karbonn-K10 model included in list
.Karbonn-K444i model included in list
.Karbonn-K478 model included in list
.Karbonn-K570 model included in list
.Karbonn-K460 model included in list
.Karbonn-K343 model included in list
.Onida-W1110 model included in list
.Micromax-Q1 model included in list
.Micromax-x2i+ model included in list
.Maxx-MX480 model included in list
.Beyond-B38 model included in list
.firmware database updated
.new flash files uploaded in support area

SPTBOX DELUXE 10.9.0 RELEASED
* First IN World GT-B7510 (Galaxy Pro) Unlock/Imei/Flash(BETA)
* First IN World GT-E2230 Unlock/Imei/Flash(BETA)
* First IN World GT-E2330 Unlock/Imei/Flash
* First IN World GT-E2330B Unlock/Imei/Flash
* First IN World GT-P1010 Flashing
* First IN World GT-E1087T Unlock/Imei/Flash
* First IN World GT-E1085F Unlock/Imei/Flash
* First IN World GT-E1105F Unlock/Imei/Flash
* First IN World GT-S5230N Unlock/Imei/Flash
* First IN World GT-E3210 Unlock/Imei
* First IN World GT-E3210C Unlock/Imei
* 12 GB NEW FILE Uploaded Support.
* Reported Minor Bug Fixed.
* GT-S5250,GT-S5253 Unlock/Imei Reactivated and Fixed

Octopus Box v 1.7.6 - Added suport for LG KU4300 and LG SU430
Octopus Box v 1.7.6 is out! We have added world's first support for LG KU4300 and LG SU430 and direct unlock for some versions of LG SH170, SH650!
Octopus Box v 1.7.6 Release Notes
KU4300 – added world's first Unlock, SAFE write firmware, Repair BT, Read/Write/Repair NVM
SU430 – added world's first Direct unlock, SAFE write firmware, Repair BT, Read/Write/Repair NVM
Added SAFE flashing option for GT540
Added repair EEPROM for KF510
Added safe writing firmware procedure for KU9600 and SU960
Added direct unlock for SW170707 and SW170710 versions of SH170
Added direct unlock for SW650807 version of SH650
Added extended manuals for a wide range of models

Vygis LGI_1_88SD released. LG T315 and T315i added
New version - LGI flasher - unlocker v1.88SD is uploaded at support sites in LG section.
- Added support for LG T315 and T315i.Flashes for them are uploaded also.

NsPro v6.0.6 released
Added T959V Galaxy-S-4G Super Fast Read Codes, Direct Unlock/Unfreeze
Fixed minor bugs on different models.

Fenix Key v1.0.5 released
Update for Fenix Key Flasher and Unlocker is ready to download.
What's new?
- Analyze Security button - added. Use this option for easy diagnostics of phone's security area. Fenix detects all damages so that you could find error and repair it quickly.
- Local SX4 auth via USB for RAP3gV3 BAF3 phones - added (first in the world)
- Local SX4 auth SL3 bug - fixed
- JAF communication improved
- 6700 SL3 "PM 120 is corrupted" bug - fixed
- Phones and variants list - updated
- Improved unlocking process for SL3 phones (Rap3gv4, RapuYama)
The update is free for all Fenix Key users.

Micro-Box AIO V1.0.8.7 : SAMSUNG FREE UPDATE FOR ALL MICROBOX
SAMSUNG UPDATE:
Added CODE READER support for :
- S5560
- Star WifiFive
- Player 5
- S5750
- S5750E
- WAVE 575
UPDATE IS FREE FOR ALL USERS !
NO PATCH, NO FLASH !

March 14

Vygis LGQ_1_73SD - LG A310 added
New version - LGQ_1_73SD is uploaded at support sites in LG section.
- Added full support for LG A310.

ORT-JTAG - ORT Plus V1.31 [ New Qualcomm CPU's ][CDMA QSC 6020] Supported
What's new in ORT Plus V1.31 ?
MSM 7225 RAW Mode initialization fixed
MSM 7227 and ONENAND Initialization Improved [ Samsung I5500 / Samsung I5503 ]
MSM 7627 Support Added [ ZTE N600 ]
QSC 6020 Supported
MSM 6125 Supported
MSM 6800 Supported

Genie Universal Update
uGenie v 0.8 ready for download. What's new:
bb5all.exe v 0.164
- Support for standalone SL3 log reading on RAPU CPUs with hash 25B9...
- Support for standalone SL3 log reading on RAPv4 CPUs with hash 7B04...
Multiphone reading in Auto mode is supported for those new hashes too. Just start in Auto
mode and all logs will be saved to the SD card.
Please do full card update, no need to update OS if you have the latest version.

RIFF JTAG - Samsung i607 Blackjack PDA, CDMA Huawei C5005, OMAP 1710 Support added
12.03.2011 Samsung SGH-i607 BlackJack PDA Unbrick, Dead Boot repair supported
Resurrecting Samsung i607 PDA part is easy. Phone requires battery presence in order to establish JTAG connection. If you additionally connect charger the phone will be auto powered on and there will be no need to press Power on key.
In case you experience connection problems, de-power phone completely, disconnect charger (if it was used), then insert battery, click Resurrection button in the JTAG Manger and immediately (within 0…1 seconds) press Power On key.
To unbrick Samsung i607 PDA part:
Solder JTAG cable to Samsung i607 PDA JTAG pads;
Make sure Samsung i607 PDA is selected in the list of models;
If only battery is connected – press Power On key shortly;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

11.03.2011 CDMA Huawei C5005 Unbrick – Repair supported
Resurrecting Huawei C5005 is simple. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.
Resurrector re-flashes only firmware zone of the phone (0×000000 to 0xBFFFFF).
To resurrect Huawei C5005:
Solder JTAG cable to Huawei C5005 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Huawei C5005 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
De-solder JTAG wires

XTC clip version 1.3.2 released
What's new:
1. Htc Sappire HBOOT 1.76.XXXX added to supported hboot versions
2. Htc My Touch 4G HBOOT 0.87X000 added to supported hboot versions
3. Htc Legend HBOOT 1.1.X000 added to supported hboot versions
4. Htc Desire HD HBOOT 0.85.X019 added to supported hboot versions
5. Htc Dream HBOOT 1.38.X000 added to supported hboot versions
6. Htc Imagio XV6975 Verizon added to supported devices
7. Htc Inspire 4G AT&T added to supported devices
8. Htc Wildfire all versions supported now
Important note:
XTC clip is not dependent of the Android version in your phone. It works fine with ALL Android versions known.

ORT-JTAG - Samsung GT-S7070 Repair Dead Boot
Description :
Samsung GT-S7070 Unbrick / Repair Dead Boot
Released Stuffs :
Samsung GT-S7070 JTAG Pinout
Samsung GT-S7070 Repair File
Samsung GT-S7070 Instructions
Samsung GT-S7070 SM

BEST v1.17.1 Ready Support RAP3,RAPIDO,RAPU,RAP4 hashes
Usb flashing improved
- N96 loaders back to 10.50
User Data operations improved
- Added 6500c, RM-265 for "low Format"
*Added JAf support
-Read Keys (For Next use for USB repair/unlock)
Support RAP3,RAPIDO,RAPU,RAP4 hashes

Rapu Yama phones:
E52-1 (RM-469)
E72-1 (RM-530)
E72-2 (RM-529)
E73 (RM-658)
6700c-1, 6700c (RM-470)
6700s (RM-576)
6710s navigator (RM-491)
6720c (RM-424)
6730c-1 (RM-547)
Supported ROOT_KEY_HASH ( RAP ):
25B977A055BE9B5DEC0C38A2A279C695

Rap3V4 phones:
X3-00 (RM-540)
6303ci (RM-638)
7230 (RM-604)
3710a-1 (RM-509)
Supported ROOT_KEY_HASH ( RAP ):

7B045400E1752022F9EB80B0DEA9C65D
> -Read Keys (For Next use for USB repairSD/unlock/SX4)
> Support RAP3,RAPIDO,RAPU,RAP4 hashes
- Some bugfixes
Total Support SL3 HASH
9DDBFCFE6E73CED7D8C6268C8EB85723
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
7B045400E1752022F9EB80B0DEA9C65D
25B977A055BE9B5DEC0C38A2A279C695

Fenix Key v1.0.4 Unlock SL3/SX4/SD Keys Repair - Standalone
What's new?
- RAPU and RAP3GV4 SL3 Brute Force unlocking via JAF and UFS - added. To unlock phone, please run Fenix Key Flasher and Unlocker, go to Locks and Security tab and click NEW SL3 Unlock button. As soon as fenix reads phone data, SLAP will open. Click Resume BF button and your code calculation will start immediately. The solution is standalone and free for all Fenix Key users.
- Standalone Local SX4 R&D auth - added (new hashes are supported also).
- Repairing SD - new SL3 hashes added.
- Flashing via JAF (BB5 phones) - added. Notice: backuping certificates in JAF takes some time. We advice user to disable Backup certificates option if JAF interface is in use.
- Reading certificates via JAF - added.
- Changed default flashing timeout for fast flash phones.
- UFS flashing speed improved.
- Switching to local mode in NCK unlocking via JAF works better now.
- Decrased timeout in SL1\SL2 USB unlocking for more stability.

New SL3 supported phones:
Rapu Yama phones:
Supported ROOT_KEY_HASH:
25B977A055BE9B5DEC0C38A2A279C695
E52-1 (RM-469)
E72-1 (RM-530)
E72-2 (RM-529)
E73 (RM-658)
6700c-1, 6700c (RM-470)
6700s (RM-576)
6710s navigator (RM-491)
6720c (RM-424)
6730c-1 (RM-547)

RAP3Gv4 phones:
Supported ROOT_KEY_HASH:
7B045400E1752022F9EB80B0DEA9C65D
X3-00 (RM-540)
6303ci (RM-638)
7230 (RM-604)
3710a-1 (RM-509)

NsPro v6.0.5 released
-Added S5570, S5660, S5670, S5830 Galaxy support.
-Added T259, T356, T369, T479U, T669C support.
-Added full support for Windows Vista and Windows 7
On Windows 7 you must set NsPro to run as administrator.
Is highly recommended to use latest nspro version.

ATF v7.20 update PA Simloc30 Unlock supported!!
Advance Turbo Flasher v7.20
Release Date: March 10, 2011
Freeloaders for RAPUYAMA and RAP3Gv40 Phones Released
Freeloaders are 100% Stand Alone loaders that allow you to perform
Super Dongle Repairs, SX-4 Authorization and PA_SL3 or PA_SIMLOC30
PM 120 HASH Decryption. These Loaders DO NOT need an ATF Network
Account or Credits. It is completely Stand Alone just like the other
OLD Hashes.

RAPUYAMA Phones Currently Supported:
ROOT HASH = 25B977A055BE9B5DEC0C38A2A279C695
E52-1 (RM-469)
E72-1 (RM-530)
E72-2 (RM-529)
E73 (RM-658)
6700c-1, 6700c (RM-470)
6700s (RM-576)
6710s navigator (RM-491)
6720c (RM-424)
6730c-1 (RM-547)

RAP3Gv40 Phones Currently Supported:
ROOT HASH = 7B045400E1752022F9EB80B0DEA9C65D
X3-00 (RM-540)
6303ci (RM-638)
7230 (RM-604)
3710a-1 (RM-509)
=================================================
The Phones listed above do NOT require Credits or Internet Connection.
=================================================
For NEW RAPUYAMA and NEW RAPIDO Phones, you STILL need to have an ACTIVATED
ATF NETWORK Account and 5 Credits for each New Phone you want to Authorize.
*** PA_SIMLOC30 HASHES are now Supported for PM 120 HASH Extraction ***
Tested on "REAL" PA_SIMLOC30 Phones: X3-02 RM-639 and C2-01 RM-721

NaNo Box : Update V 1.3.8 READY
[LG Infineon] by NANO Interface
+ read all network lock codes
+ factory reset/phone lock code remove
Models:
GB250
GB250f
GB250g
GB255
GB258
+ nano buttons grouped to lock,service functions
Fixed:
+ LG infineon unlock instruction for some new LG models

Micro-Box AIO V1.0.8.6 : SAMSUNG I9000/GALAXY S DIRECT UNLOCK
SAMSUNG UPDATE:
- I9000/GALAXY S DIRECT UNLOCK!

Smart Clip SmartMoto v4.16 Added support of Alcatel models based on MT6235 MCU
Reading of the NCK, NSCK, SPCK, CCK, PCK codes, Format FFS for all available firmware versions of the following Alcatel models based on MT6235 MCU:
OT-800 / VM800
OT-802
OT-806D (dual-sim)
OT-807
OT-808
OT-880
Procedure is simple and fast. No need internet connection or server credits to calculate codes.
Released Format FFS for following Motorola models:
EX112
EX115
EX128
Support of Alcatel models based on MT6253 MCU (beta testing).
"Phone MCU boost mode" option for OT-255 on Chip AMD-UNIFORM ID [1227E-22202200] is fixed.
Note: Support of other Alcatel OT-8XX MTK-based phone models are added in beta test mode.
In case you have the Motorola or Alcatel handsets based on MT6235/MT6253 MCU, please make a backup using LATEST SmartMoto version (v4.16) and send it to us by e-mail along with the log file. We will investigate them and add these models to the list of supported in further updates.

Cyclone Box Installer v1.12 Released
=====================
Installer v1.12
09.03.2011
=====================
- Firmware v1.55 introduced - RAP4 CMT Booting (Wrong first char) fixed
- Added SP unlock via server / log2cod reading
- Added standalone SX4 auth
- Added standalone Superdongle Keys Repair
- Supported phones:
- RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
- RAP4 Based: 3710, 5330, 7230, 6303i, X3
- Minor changes and bugfixes

Cyclone Standalone Unlock/SX4 Auth/SD Keys repair for 6700,E52,E55,E72,X3,.. added
Hi, new update for Cyclone box is available.
- Added SP unlock via server / log2cod reading
- Added standalone SX4 auth
- Added standalone Superdongle Keys Repair
- Supported phones:
- RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
- RAP4 Based: 3710, 5330, 7230, 6303i, X3
All is free and standalone Box firmware upgrade to v1.54 is needed.

Infinity-Box: Fly and TMN models updated
.Fly-V180DS model supported
.Fly-Ezzy model supported
.Fly-E170 model supported
.TMN-Script model supported
.T-Mobile-Zest unlock operation improved
.Coral-255 unlock operation improved
.Micromax-X600 model included in list
.Intex-IN2022 included in list
.firmware database management improved
.firmware database updated
.new flash files uploaded in support area

ATF 7.10 Update SL3 Local Brute Force for ALL BB5 HASHES!!
SL3 Local Brute Force for ALL BB5 HASHES via FBUS Cable
*** SL1/SL2 Stand Alone Unlock and Rebuild Simlocks via Simlock RPL ***
Requirements For Service:
You need to have an ACTIVATED account in The ATF Network if your phone is NEW HASH.

Authorization Cost for EACH NEW HASH Phone is still just 5 Credits
After phone is AUTHORIZED, you can do the following tasks in Stand Alone Mode:
1. Super Dongle Repair
2. SX-4 Stand Alone Authorization
3. Decrypt SL3 PM 120 HASHES

Supported BB5 New HASHES via FBUS (Cost 5 Credits):
479C6DDE3942E12C429C1D6ADED803710E52EBD3
C70CB07324056BC66A824347F40DB2D5E198D1B2
916F75217F32081248B15C38DFC8E81B1803F26F
25B977A055BE9B5DEC0C38A2A279C6958594B998
7B045400E1752022F9EB80B0DEA9C65D6FBA5B05
928E5FFB88D81E5F74729A212AB9D12EC755ED14
2C05369F57CC3C4CF9E783E83D9B512B53E28D99
3AB5DB70B45D23F1ADEEBB5734160706668138E1
2B910DA4E0FBEFFFE5C65D3682854636C02881F7
68597B9162BAB81AF74C56E78EA2588F2D968376
EA81B32860B86EF4231A11831045F3E6AE071379
8E309B54DA1ADDE27C2A035D63AACACDCB6C003B
DA550B5BAAB517409088A3E4F3EB53AC9E57D0A3
B8C3ADECFC997FCD8081D3DEAF870B8CBC33AE82
B1A9CEADB5CE9CF9FB4F442150AA8E09D5F17F77
46802B476C93A05CBAF76A64752086A9A7320E5C
1B0D74C532CA1C6133940C740E8C786E49B99671
700370BCF8AFBAB25DD62DBD124FD9CEEA461DFF
87FAC992288DA497A663E5DDC0410B11521B8D0C
55DF9CBCC80B17225043DDA1CC783C979BBCB7BC
49A97E826B93BA20B7ED0B082475C0056EBB8F8D
FEA0F9E21EF50B836924A9F25D85C643D8514505

Supported BB5 OLD HASHES via FBUS (100% FREE and DOES NOT NEED ATF NETWORK ACCOUNT)
38F312750F686F9FC9B1B3778774A195
9A28E119033B91D14D22838C86D0D53C
9DDBFCFE6E73CED7D8C6268C8EB85723
A5404AE83A594ECADEE532F0C236BFA6
BAF3A9C3DBFA8454937DB77F2B8852B1
CAEEBB65D3C48E6DC73B49DC5063A2EE
E9EFF4BFAA5393217CA6B17755FC3E14
F2D76DFAFD66C7F195F278417DF05888
F682624FFB08F6D955DBE7D9C0485084
FCB5C510AF7F09F313D9BDE85A707CC0

Z3X Box Samsung Update. S3310i direct code reading added
Samsung 2G Tool Update ver. 3.5.0008. Again first in the world and again hot model
Added:
- S3310i support (direct code reading via USB cable without any pacth) - first in the world

Micro-Box AIO V1.0.8.5 UPDATE LG, BB, HTC
LG UPDATE:
- GT350 Code Reader!
BLACKBERRY UPDATE:
- 9780 Code Reader & Calculator!
HTC UPDATE:
- Added support for ANDROID 2.3 (beta)!

ORT-JTAG - Huawei ETS2222 Repair Dead Boot
Description :
Huawei ETS2222 Repair Dead Boot
Released Stuffs :
Huawei ETS2222 JTAG Pinout
Huawei ETS2222 Repair File
Huawei ETS2222 Instructions

RIFF JTAG - Updates

Qualcom Generic NAND ESM7xxx DLL released
Resurrector ESM7XXX L41 D04 contains only DCC Loader, thus it is to be used only for operations on DCC Read/Write page in the JTAG Manager.
Embedded DCC Loader is designed to work inside of MCU's internal RAM memory, thus it is not sensitive to external SDRAM configuration or availability or its physical state.
Initial H/W init sequence will setup MCU's PLL0 with these parameters:
L/M/N = 0x41/0x00/0x01;
Global Clock Divisor = DIV4
If you don't know what the L, M, N or Global Clock Divisor parameters are, then just keep in mind:
Highest L values and lowest Global Clock Divisor values will make maximum clocking frequency supplied to the MCU's core and thus DCC Read/Write speed will be maximum fast;
Too high frequency supplied to the MCU's core may result in core overheating or instable operation;
..................
Samsung G800 Unbrick, dead boot repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“Samsung_G800.dll” contains pinout, instructions and required repair files for Samsung G800 Unbrick, dead boot repair.
..................
ZTE MF180S Broadband modem Unbrick/Repair supported
Please start JTAG Manager and click “Check for Updates” button. You’ll be notified about new DLL, download it and restart the software.
“ZTE_MF180S.dll” contains pinout, instructions and required repair files for ZTE MF180S Broadband modem Unbrick/Repair boot.

ORT-JTAG - ORT Plus V1.29 Released
MSM 6290 RAW Mode Enabled
NOR Flash ID Added [0x88670020]

ORT-JTAG LG GM750 Unbrick / Repair Dead Boot
LG GM750 Unbrick / Repair Dead Boot
Released Stuffs :
LG GM750 JTAG Pinout
LG GM750 Repair File
LG GM750 Instructions
LG GM750 SM
 

Vygis LGI_1_87SD released. LG GU200,GU200a and GU200b added
New version - LGI flasher - unlocker v1.87SD is uploaded at support sites in LG section.
- Added support for LG GU200,GU200a and GU200b.Flashes for them are uploaded also.

Fenix Key v1.0.3 released
Fenix Key and Fenix Enigma Calculator updates are available.
Fenix Key v1.0.3 unlocks BB5 SL1/SL2 and DCT4+/DCT4++ phones via JAF Interface. And a hot update for Fenix Enigma Calculator is available!
What's new in Fenix Flasher and Unlocker?
- Unlocking all BB5 SL1/SL2 phones via JAF - added. Fenix generates NCK codes and send them to phone automatically or you can send them on your own. For devices that have bloked NCK input counter you can use Unlock via RPL option. No Internet connection is required. The solution is unlimited and free for all Fenix Key users and does not require any logs.
- Local DCT4+/DCT4++ Unlocking via JAF interface - added. No Internet connection is required. The solution is unlimited and free for all Fenix Key users and does not require any logs.
- Repairing SIMLOCK area in all BB5 SL1/SL2 phones via JAF - added.
- Repairing SD keys in BB5 SL3 phones via JAF - added.
- Repairing SD keys in all BB5 SL1/SL2 phones via JAF - added.
- Reading phone info, reading and writing PM, setting product code, executing self tests, repairing camera config (DCC), defaults settings, resetting and reading user code, reading MMC passwords via JAF - added.
What's new in Fenix Enigma Calculator?
- Alcatel Modems: X020, X030, X060S, X070S, X080S, X100X, X200X, X200S, X210X, X210S, X215S, X220L, X225L, X225S, X228L
- Huawei Modems: Momodesign MD-@ HSU
- ZTE I Phones: ZTE N281 - CSKA
- ZTE II Phones: TMN Bluebelt, TMN Bluebelt II, TMN Silverbelt, TMN Soft Stone (Android OS), Blade, Mercury, N61, Racer, Xiang, X850, 547, SFR 115, SFR261, Vodafone 1230, Vodafone 1231
You do not need any logs. No Internet connection is required neither.
Notice: JAF Firmware 01.B1 or newer (01.B2, 01.B3, 01.B4) is required.
How to update ?
Open Fenix Key Smart Start software and click Check for updates button. All new files will download automatically.

XTC clip version 1.3.1 released
What's new:
1. XTC Clip software, more support links added.
2. Htc Windows Mobile, HTC Lolite added to supported devices.
3. Htc Windows Mobile, HTC Jade added to supported devices.

Z3X BOX LG News. LG 2/3G Tool 2.1.5 Update
Added:
- GD880 full support (read/write/repair NVM, improved unlock, imei repair)
- GD880f full support (read/write/repair NVM, improved unlock, imei repair)
- GD880g full support (read/write/repair NVM, improved unlock, imei repair)
-new version of korean firmware added for unlock
p.S From now 2g tool phones, 3g tool phones, lang editor will be in 1 program: LG 2g/3g tool

Sptbox deluxe 10.8.1 released
* First in World GT-I9010 Unlock/Imei/Flash
* First in World GT-S5660 Unlock/Imei/Flash
* First in World GT-S5260 (STAR 2) Unlock/Imei/Flash
* First in World GT-S5263 (STAR 2) Unlock/Imei/Flash
* First in World GT-S5830C Unlock/Imei/Flash
* First in World GT-S5670 Flash(Unlock/Imei Allready Support)
* First in World GT-S5570 Flash(Unlock/Imei Allready Support)
* First in World GT-S5830 Flash(Unlock/Imei Allready Support)
* First in World GT-E1150I Unlock/Imei/Flash
* First in World SGH-T749 All version Unlock/Imei/Flash
* First in World SGH-A887 All version Unlock/Imei/Flash
* First in World SGH-A897 All version Unlock/Imei/Flash
* First in World T749-A887-A897 Touch Problem Fix(Which Damage With Other Box)
* GT-E1175T Swa and Mea Region Added.
* GT-C3222 New Boot Added(Which after some firmware reset problem solved)
* 12 GB New Flash File Uploaded At Support.

Infinity-Box: MTS, Fly, ZTE, Spice, Intex, Karbonn, Maxx, Olive models updated
.MTS-535 model supported
.Fly-Q110 model supported
.ZTE-R230 operations improved, models with 16Mb and 32Mb flash chip supported
.Intex-IN2030D model updated
.Intex-IN2030Dx model updated
.Intex-IN3055 model updated
.Intex-IN6611-Ace model updated
.Intex-iSmart model updated
.Intex-IN2020-Nano model updated
.Intex-IN2020-Nano2 model updated
.Karbonn-K406 model updated
.Maxx-MX488 model updated
.Spice-M4580n model updated
.Spice-M5055 model updated
.Spice-M5161n model updated
.Spice-M6000 model updated
.Spice-M7000 model updated
.Olive-VG200 model updated
.Olive-VG300 model updated
.Olive-VG400 model updated
.Olive-VG500 model updated
.Olive-VG800 model updated
.Olive-VG3000 model updated
.Olive-VG3100 model updated
.Olive-VG3200 model updated
.Olive-VG3201 model updated
.Olive-VGc800 model updated
.Hello-HL2802 model under test
.firmware database updated
.new flash files uploaded in support area

Z3X BOX Samsung update
Samsung 2G Tool Update ver. 3.5.0007. Hot models added first in the world.
Added:
- S3350 support (direct code reading via USB cable without any pacth) - first in the world
- S3353 support (direct code reading via USB cable without any pacth) - first in the world
- С5130 addition support ( flash via usb cable )
- С5130U addition support ( flash via usb cable )
- C5130S addition support ( flash via usb cable )
- C5130C addition support ( flash via usb cable )
Fixed: tfs bug flashing C3300, C3222
p.s. If program will say "code not found" please read full from phone and post link for this full flash in forum.

Kulankendi Ver 2.96 World First Update Released
World First! Added Mobit U11 phone/data card unlocking by all codes reading
Added INQ1_V2.7_UK firmware support
Huawei router B932 new variant added
From now, Login/Password edit boxes are hidden for KKBox/Dongle users
Added manual com ports selection for modems/routers