|
Updated Software
1.
UserPort - Allows service software to run under Windows NT, 2000 and XP -
Download Now - (44Kb)
Trouble Shooting
1. Repeat the Data Cable Set-Up instructions, but try turning your
phone on after the software is running.
2.
Serial port settings must not been in use by another device (eg. internal
modem). You can check this through the Device Manager that can be found in
Windows Control Panel.
3.
There must be no IRQ/DMA conflicts on the serial port. You can check this
through the Device Manager that can be found in Windows Control Panel.
4.
The correct serial port must be selected in the software. Try different
serial ports if you are unsure what serial port to use.
5.
The cable must be configured correctly in the software settings. (eg. MBus/FBus)
6.
All connections must be secure to get a reliable connection.
7.
If software can work on both M and F bus, then cable settings must match
software settings. (eg. Logomanager)
8.
The software you are using must be compatible with your computers operating
system (eg. Windows 98) and the software must support your cable/phone.
9. The software you are using must be installed correctly, and you
should always reset your computer after installing new software.
10. When using unlocking software in Windows NT, 2000 or XP then you
also need to install
UserPort
(44Kb).
11. You should only have one program that uses the serial port
running at once. Having two or more programs trying to access the serial
port at once will cause port conflicts and errors.
12. Check the both the battery and sim card are securely inserted
into the phone.
Tips
1. Use
Oxygen Phone Manager II
to check your connection.
2. Check that you have upgraded to the latest version of the software
you are using.
3. The four metal pins on the bottom of the connector should be
springy and of equal length.
Check that you have not jammed any of the pins by fitting the cable
incorrectly. Correct fitting instructions can be found above.
Frequently Asked Questions
Q. My phone displays the message "Accessory Not Connected" and the
software won't connect ?
A.
This usually occurs if you are trying to use the Nokia PC Suite software.
This software does not support the 3510 or 3510i or any other 35xx series
phones, hence the error message, and will only work with compatible phones.
The message will also be displayed when attempting to use any other software
that is not compatible with either your phone or your cable.
Q. I didn't follow the instructions and I jammed one of the
connection pins, how can I fix it ?
A. Use a pair of tweezers to gently pull the pin upwards and
back into place so it is the same height as the other pins. If you do not
pull gently and upwards then you will risk pulling the pin right out of the
socket and rendering your cable unusable.
Q. The phone won't turn on with the cable connected ?
A.
There are 3 typical reasons for this occurring:
-
The battery is
not charged. You should charge the battery fully before trying to use the
cable.
-
The battery is
not inserted into the connector. You should check the above instructions
to see how to fit the battery.
-
The connector
and battery are not inserted into the phone correctly. You should check
the connector is plugged into the phone the correct way around, and that
it has clicked securely into place. Look at the battery contacts on the
phone, the cable connector and the battery, and make sure that the items
are plugged in so that all battery contacts match and are correctly
aligned.
Recommended Website:
MobilePlayground.co.uk Free Java Games & Instructions on how to upload
them with this datacable.
Recommended Software
1.
Oxygen Phone Manager II
2.
Polyphonic Ringtone Uploader 1.0.1 (3510 only)
3. MobiMB Mobile Media Browser 1.2
4.
NK Profile
5. DCT-4 Unlocker by Cyber
7.
Oxygen Ringtone Workshop |
){kind=link}