Special PCB with mounted pins to allow repair boot on Samsung Galaxy Not N7000. For working with Riff Box, ORT, JRT, Medusa and other devices using JTAG and supporting this model.
Special PCB with mounted pins to allow repair boot on Samsung Galaxy Note N7000
Compatibility
Omnia Repair Tool (ORT)
JRT for SMTI
RIFF Box JTAG
Medusa JTAG Box
and other devices using JTAG and supporting this model.
Usage Notes
90% of N7000 does not have a molex connector (ribbon connector) fitted on the phone board.
If this is the case and your board doesn't have this connector installed, you need to solder a molex connector to the board first as on shown picture below.
It's much easier to do this than soldering ultra-thin wires.
After this you can connect JTAG adapter to the soldered molex connector and perform your Jtag repair as shown on the video below.
Video Demo
Package Contents
1 X Samsung N7000 Galaxy Note Jtag Jig
1 x 20 Pin Molex port (more available here separately, or you can buy an extra one with your jig below)
