Samsung i9020 / i9023 Nexus S JTAG Jig (+1 X 12 Pin Molex Port)
Special PCB with mounted pins to allow repair boot on Samsung Nexus S i9020 / i9023
Compatibility
Omnia Repair Tool (ORT)
JRT for SMTI
RIFF Box JTAG
Medusa JTAG Box
and other devices using JTAG and supporting this model.
Usage Notes
90% of i9020 / i9023 does not have molex connector (ribbon connector) fitted on the phone board.
If this is the case and your board doesn't have this connector installed, you need to solder a molex connector to the board first as on shown picture below.
It's much easier to do this than soldering ultra-thin wires
After this you can connect JTAG adapter to the soldered molex connector and perform your Jtag repair as shown on the video below.
Video Demo
Package Contents
1 X Samsung i9020 / i9023 Nexus S Jtag Jig
1 x 12 Pin Molex port (more available here seperately, or you can buy an extra one with your jig below)
