Step A Create a Gold Card with Unlock Feature.
1 Insert a MicroSD/TFlash Card in to your XTC Clip
2 Plug your clip in the Pc usb cable and wait for the software to auto Load & Start itself.
3 First Step is to Generate a Gold Card.
Follow the Steps Below to create the gold Card.
From the System Option select HTC Android
Select the Model of phone you wish to Network Unlock/CID unlock/User code Reset
After Selecting the HTC Desire/Bravo you will see under Version option where you can find the different bootloaders options.
Select HBOOT version of the HTC Desire/Bravo once you Select the Phone Model.
Before unlocking Android HTC Phones please check your Boot Loader version and make sure you use only the gold card created for the phone with corresponding boot Loader.
How to check bootloader version of HTC Desire ?
Switch off the device. Keep Hold of the Volume Down Button & Press Power ON button.
You should be able to see the text ‘HBOOT’, and a version number besides it.
This number is the bootloader version HBOOT-0.93.0001
Select the Boot loader Version from the List 0.93.001
You can see now all the correct settings.
Make your Micro SD Card is already inserted in to the XTC Clip.
Now We are ready to make the gold Card for the correct Version of the Boot and Model of Phone
Press Create Goldcard
The Screen will change to show that a goldcard is being Created.
When the Gold card is ready you will see a pop up showing the contents of the folder.
Screen Will show Gold Card is generated succesfully.
Step B Unlock Phone – (SimLock, Super CID, Security Unlock / S-OFF)
1 Insert the flex PCB Virtual Dummy Sim Adapter in to the Sim gate of the HTC Desire/Bravo Android phone
you are Servicing and in to the XTC clip connector you can see protruding from the side of the clip.
2 Insert the Gold Card you Generated from Step A in the HTC Desire/Bravo
3 Attach the battery to the phone.
4 Attach Battery or USB Cable to the PC/Laptop to power up the XTC Clip.
5 Keep Hold of the Volume Button & Press Power ON button to enter Boot Loader Mode
.
6 You will see the Boot loader mode and after 10 seconds the unlock software will start
If you watch the Screen you will see the update in progress message.
Then the screen will go blank for 1 second till Diag Mode Starts.
7 Select Diag by Pressing the Action Button in the Centre as shown in the image.
8 Next Press the Action Button when you see Screen showing options to start “Clear s58 Data”
9 Press Power Button to confirm and you will the Message Below & the Phone Will Be Unlocked
If You Get this Error Message at this Stage AT-CMD Time Out then...
...Recheck the connection of the virtual dummy sim FPCB adapter and replace battery in phone and power on clip and try again.
Notes to remember
Always Check your bootloader version
Power off the XTC clip and re power on after each unlock
