Vodafone 716 Unlock Clip

 

The Vodafone 716 Unlock Clip supports unlocking of Huawei/Plusfon/Vodafone v2.0 models.

 

Clip is very easy to use - just connect battery and Clip into phone and after a few seconds the phone is unlocked.

Supported models:

• V716

• V715

• U120

• U120e

• U120s

• 401i

• U121

Features:

• Direct Unlock via JTAG

 

---

 

Unlocking Instructions

 

Vodafone V716 JTAG clip Unlock Manual

1- Supported models with this clip: V716, V715, U120, u120e, u120s, U121
2- You have to open your phone back side and keep only the phone PCB with the front cover
3- Connect clip to phone insert any locked sim card in clip same as in photo

 

You must be sure all this points contacts with mobile phone points

 

4- Now connect 9v battery to clip ( never use more than 9v if more maybe destroy your phone and clip)
5- Now try to switch on your phone ( clip will give power to phone no need battery )
6- Wait until phone keypad have light then press then unlock button
7- If clip LED becomes GREEN then that means all is ok and u wait until phone ask for NCK code same as photo

 

 

8- Then u enter 0000000000000000 ( 16 zeros )
9- Then phone will say that will restart and that means phone unlocked
10- If LED becomes RED then u have to try again also if phone restart then u have to retry again
11- If LED becomes RED very fast no delay at all that means clip cannot detect JTAG points
12- If clip cannot detect JTAG points try pls to clean the phone JTAG points also attach clip and phone together good

 

---

 

More information about clip

 

1- Red part is show the SIM holder, put here pls your sim card ( Not Vodafone and be sure phones not say insert SIM card)
2- Light green show the power regulator area ( normally it is hot don’t touch with hand and I try wait few minutes if you unlock big quantity )

 

1- Blue part Shows the clip LED which indicate unlock done or not
2- Red part shows the points to fix clip with phone
3- Green part shows the unlock button
4- Yellow part shows the contact point for give mobile phone 3.3v to power on without use phone battery
5- Light green show the sim card contact points
6- Pink colour shows the JTAG contacts points

 

How to connect clip for v716

1- Clip connect in the red 2 screw points only
2- Be sure u connect clip first and later after u be sure clip connected good connect battery ( Very important )
3- Yellow part which is give 3.3 V to mobile phone to switch on without battery ne sure it is touch the phone point
4- Green part shows the sim card connection with phone
5- Blue part shows the JTAG points connection

 

How to connect clip to V715

1- Red points to fix clip in the 4 screw points ( in V716 we use 2 only )
2- Yellow part shows Sim contacts points
3- Pink color part shows the 3.3V point to give power to mobile phone be sure it is touch the phone point
4- Green part shows JTAG points connection
5- Be sure u connect clip first and later after u be sure clip connected good connect battery ( Very important ) this
can easy destroy your clip so take care of that