About Tornado Tool PC

Tornado Tool PC is specially made for all GSM Servicing Engineers and other on-the-go
Service Technicians. Portable and easy to carry, fast desktop power equivalent. Touch screen with optional keyboard input. Car charger adapters included, can be used in car, ultra low power consumption. Very good for mobile repairer, car diagnostic, etc. Suitable for fast and mobile remote area servicing. This Tornado Tool PC Comes with built in UFS / HWK interface

FoneFunShop Engineers Comments

We have a couple of these setup in our store.  They are just like a windows desktop PC, except they take up very little space.  We have used this tool to go onsite to some of our customers that need multiple phones unlocking too, and because it has a very stable power system unlike most laptops its very good at working nokia tools also.  We have installed a few tools on ours including Fenix key, Z3X Box as well as UFS HWK (obviously as it's built in) and they work very well.  The screen is not too small either, everything displays as it should, and the touch screen is very accurate.  Because it is a PC you can connect a keyboard or mouse to it if you prefer, you can even connect a monitor and speakers if you wanted too :-)  All in all its a very good idea, and for anyone on the move or working market stalls its ideal. 

Tornado Tool PC Specifications

• Dual-Core Intel® Atom™ processor with integrated graphics and integrated memory controller, passively cooled

• 1GB 800MHz DDR2 SDRAM Dual Inline Memory, supports up to 4GB DIMM

• 500GB, 5400RPM SATA Seagate 2.5inch Hardisk

• Intel® NM10 Express Chipset, passively cooled

• Multi-streaming 4+2 channel audio subsystem support based on the Realtek ALC662 high definition audio codec

• 10/100/1000 Mbits/sec LAN subsystem using a Realtek 8111DL Gigabit Ethernet Controller

• Internal Graphics Onboard Intel® graphics subsystem with support for:

  • Integrated GMCH

  • Analog displays (VGA)

  • 7 inch display (800 x 600) with inbuilt Touchscreen interface.

  • Legacy I/O Control

  • Winbond W83627THG-I based Legacy I/O controller for hardware management, serial, parallel, and PS/2 ports

• Peripheral Interfaces

  • 5 USB 2.0 ports

  • 4 left side panel ports

  • 1 right side panel port

  • Optional UFS micro with HWK OR RIFF JTAG Box interface inbuilt inside the system

  • PS/2-style keyboard and mouse ports

• BIOS

  • Intel® BIOS (resident in the SPI Flash device)

  • Support for Advanced Configuration and Power Interface (ACPI)

  • Plug and Play, and SMBIOS

  • Instantly Available PC Technology

  • Support for PCI Local Bus Specification Revision 2.3

  • Suspend to RAM support

  • Wake on PCI, PCI Express, PS/2, serial, front panel, USB ports, and LAN

• Expansion Capabilities

  • One PCI Conventional bus connector

  • PCI Express x1 Mini Card connector

  • Hardware Monitor Subsystem

  • Hardware monitoring through the Windbond I/O controller

  • Voltage sense to detect out of range power supply voltages

  • Thermal sense to detect out of range thermal values

  • One fan sense input used to monitor fan activity

  • Fan speed control

• Dimensions

  • 19.5x 19.5x 8 cm

  • Weight: 1.9kg
    
     

About UFS HWK

UFS/HWK Box by Saras can flash most of the phones for leading mobile phone industries, such as Nokia, Samsung, SonyEricsson, Motorola, Siemens, etc.

• Full Details of UFS /HWK Features Here

Gallery