Unlocking SonyEricsson Phones Using The Total Multi Server Software

Before attempting to unlock your phone, make sure your phone is fully charged
  • Make Sure you are connected to the internet
  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Press the info button, this will update the Multiserver Software to the latest version.
  • Open Total Multi-Server client again and enter your login and password again.
  • Power Off phone and remove sim card.
  • Connect unlocking cable. USB cable users be sure to have installed the drivers correctly, installation guide & downloads here.
  • Serial cable users, do not need drivers
  • Follow the steps below

The phone is now unlocked and phone code reset to 0000

Note: If your phone is not detected after pressing power on, uncheck the "DTR" & "RTS" boxes (Pictured Below) and repeat the process.

 

Debranding / Language Changing SonyEricsson Phones Using The Total Multi Server Software

Before attempting to unlock your phone, make sure your phone is fully charged
  • Make Sure you are connected to the internet
  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Press the info button, this will update the Multiserver Software to the latest version.
  • Open Total Multi-Server client again and enter your login and password again.
  • Power Off phone and remove sim card.
  • Connect unlocking cable. USB cable users be sure to have installed the drivers correctly, installation guide & downloads here.
  • Serial cable users, do not need drivers
  • Follow the steps below

This walkthrough is based on debranding a K750i, and should be used as a guide

STEP 1. Downloading the required flash files

Press the "Download Area" button and download the correct firmware for your phone model.

NOTE: T610/T630/t68i/z600 users should download the GDFS file (full decusomisation) and use the GDFS menu to debrand their phone (no need for 2 files)

 

STEP 2. Downloading the required Language files

Download the coresponding language file for your model. Once you have downloaded this, press exit button to return to the main screen

Step 3. Setting up software and executing the debrand

Follow the steps in this picture below to complete the debranding process

 

 

 

 

Converting K750/K750i to new W800i

 

Before attempting to unlock your phone, make sure your phone is fully charged

  • Make Sure you are connected to the internet
  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Power Off phone and remove sim card.
  • Connect unlocking cable. USB cable users be sure to have installed the drivers correctly, installation guide & downloads here.
  • Serial cable users, do not need drivers
  • Follow the steps below

STEP 1. Downloading the required flash files

Press the "Download Area" button and download the w800i firmware and a language pack.  Download them one after the other.

Step 2. Setting up software and executing the conversion

Follow the steps in this picture below to complete the debranding process

 

 

 

USB Cable Installation Guide

 

First, make sure you have downloaded the correct drivers for your USB cable

 

 

Professional High Speed 2 - in - 1 Total Multiserver SonyEricsson USB Cable Pack Driver Download

 

 

 

K750 type (2 prongs on cable) cable Driver Download

 

 

 

T28 Cable Type (3 prongs on cable) Driver Download

 

 

 

 

Sharp 902, 801, 802 USB unlock cable Driver Download

 

 

 

 

Professional High Speed 4 - in - 1 Total Multiserver SonyEricsson USB Cable Pack Driver Download

 

 

 

Setting up the USB cable

  • Unzip the drivers to a folder on your desktop

  • Connect the cable

  • Windows will want drivers

  • Manually point windows to the folder on the desk top

  • Windows will install the drivers (select continue anyway at the prompt)

  • If windows does not ask Right click the MyComputer icon on your desktop and select properties

  • Select hardware

  • Select device manager

  • Look for anything with a yellow question mark or exclamation mark

  • If you do not have one then windows has indeed installed the cable and you can find the correct com port number for your cable under the ports area of device manager

  • If you do have a yellow question mark or exclamation mark, then double click it

  • Select driver

  • Select update driver

  • Manually select the driver by browsing to the folder on your desktop

  • Once all question marks are gone then goto the ports area on device manager and find the newly assigned com port number

  • This com port number needs to be selected when you run the multiserver software

 

 

 

 

 

 

 

 

MORE Helpful INSTRUCTIONS

 

 

Using The Total Multi Server Software & De-Branding Your Phone

 

Before attempting to unlock or de-brand your phone, make sure your phone is fully charged

 

This process removes software branding that is in your phone, this can be limited menus systems, custom graphics etc. implemented by service providers into your phone.  Removing this reverts your SonyEricsson Phone back to it's original state ie. how the phone should be !

How to de-customise / remove network branding on SonyEricsson K700(i)

Only 1 log needed for this whole process

Before attempting to unlock or de-brand your phone, make sure your phone is fully charged

Please note all added User Data (ie. SMS/Pictures/tones etc.) Will be lost after this operation

The steps below are also the way to repair blinking K700i phones

  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Press the info button, this will update the Multiserver Software to the latest version.
  • Open Total Multi-Server client again and enter your login and password that we emailed to you.
  • Press the "Download Area" button.
  • The downloads section will open and now you need to download your language file and firmware file.  English users select and download items marked 1 & 2 Below.  Other languages are available.  Download the languages list to view other languages.
  • Press Exit to return to main screen
  • Remove sim card & Power Off phone.
  • Connect T28 Unlocking Serial cable.
  • Select K700/K700i in the drop down menu
  • Select Repair/Debrand in the flashing menu
  • Select correct serial port where cable is installed.
  • Select correct Buad Rate - 115200 for Serial Cable

The step above must be completed without errors before you start the next step

  • Select the Firmware File which you downloaded, just like the picture below.
  • Press Flash
  • The new firmware will be installed

The step above must be completed without errors before you start the next step

  • Select the Language File which you downloaded, just like the picture below.
  • Press Flash

Once the steps are completed the phone will be fully working and de-customised

 

 

How to de-customise / remove network branding on SonyEricsson Z1010

Only 1 log needed for this whole process

Extra Help available at the FORUM

Before attempting to unlock or de-brand your phone, make sure your phone is fully charged

Please note all added User Data (ie. SMS/Pictures/tones etc.) Will be lost after this operation
  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Press the info button, this will update the Multiserver Software to the latest version.
  • Open Total Multi-Server client again and enter your login and password that we emailed to you.
  • Power Off phone and remove sim card.
  • Connect T28 Unlocking Serial cable.
  • Select Z1010 3G in the drop down menu
  • Select Repair/Debrand in the flashing menu
  • Select correct serial port where cable is installed.
  • Select correct Buad Rate - 115200 for Serial Cable

The step above must be completed without errors before you start the next step

  • Select the Normal Z1S file for example Z1010_R1G007_ZONE_1.Z1S
  • Press Flash
  • When it says done DO NOT disconnect cable or power on phone

The step above must be completed without errors before you start the next step

  • Press the X button next to the firmware file so it is no longer selected
  • Select the Default Language file(Z1D) you prefer
  • Press Flash

Once the steps are completed the phone will be fully working and de-customised

 

 

How to de-customise / remove network branding on SonyEricsson K500(i)

Only 1 log needed for this whole process

Before attempting to unlock or de-brand your phone, make sure your phone is fully charged

Please note all added User Data (ie. SMS/Pictures/tones etc.) Will be lost after this operation
  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Press the info button, this will update the Multiserver Software to the latest version.
  • Open Total Multi-Server client again and enter your login and password that we emailed to you.
  • Power Off phone and remove sim card.
  • Connect T28 Unlocking Serial cable.
  • Select K500/F500 in the drop down menu
  • Select Repair/Debrand in the flashing menu
  • Select correct serial port where cable is installed.
  • Select correct Buad Rate - 115200 for Serial Cable

The step above must be completed without errors before you start the next step

  • Select the Normal K5S file for example K500_R2AA003_ZONE_1.K5S
  • Press Flash
  • When it says done DO NOT disconnect cable or power on phone

The step above must be completed without errors before you start the next step

  • Press the X button next to the firmware file so it is no longer selected
  • Select the Default Language file(K5D) you prefer
  • Press Flash

Once the steps are completed the phone will be fully working and de-customised

 

 

How to de-customise / remove network branding on SonyEricsson F500(i)

Only 1 log needed for this whole process

Before attempting to unlock or de-brand your phone, make sure your phone is fully charged

Please note all added User Data (ie. SMS/Pictures/tones etc.) Will be lost after this operation

  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Press the info button, this will update the Multiserver Software to the latest version.
  • Open Total Multi-Server client again and enter your login and password that we emailed to you.
  • Power Off phone and remove sim card.
  • Connect T28 Unlocking Serial cable.
  • Select K500/F500 in the drop down menu
  • Select Repair/Debrand in the flashing menu
  • Select correct serial port where cable is installed.
  • Select correct Buad Rate - 115200 for Serial Cable

The step above must be completed without errors before you start the next step

  • Select the Normal K5S file for example K500_R2AA003_ZONE_1.K5S
  • Press Flash
  • When it says done DO NOT disconnect cable or power on phone

The step above must be completed without errors before you start the next step

  • Press the X button next to the firmware file so it is no longer selected
  • Select the Default Language file(K5D) you prefer
  • Press Flash

Once the steps are completed the phone will be fully working and de-customised

How to de-customise / remove network branding on SonyEricsson S700(i)

Only 1 log needed for this whole process

Before attempting to unlock or de-brand your phone, make sure your phone is fully charged

Please note all added User Data (ie. SMS/Pictures/tones etc.) Will be lost after this operation

  • Open Total Multi-Server client and enter your login and password that we emailed to you.
  • Press the info button, this will update the Multiserver Software to the latest version.
  • Open Total Multi-Server client again and enter your login and password that we emailed to you.
  • Power Off phone and remove sim card.
  • Connect T28 Unlocking Serial cable.
  • Open Total Multi-Server Client
  • Select S700i in the drop down menu
  • Select Repair/Debrand in the flashing menu
  • Select correct serial port where cable is installed.
  • Select correct Buad Rate - 115200 for Serial Cable

The step above must be completed without errors before you start the next step
  • Select the Normal S7S file for example S700_R3B032_ZONE_1.S7S
  • Press Flash
  • When it says done DO NOT disconnect cable or power on phone

The step above must be completed without errors before you start the next step
  • Press the X button next to the firmware file so it is no longer selected
  • Select the Default Language file(S7D) you prefer
  • Press Flash

Once the steps are completed the phone will be fully working and de-customised