|
| |
If you just need a mobile phone
unlocking, please use our
Unlocking Services
|
NEW ADD-ON
Smart Adaptor For Smart Clip
NEW ADD-ON |
|
Smart Adaptor
for Smart-Clip is specially
developed by GsmServer team to enable Smart-Clip connection to PC
USB. The SmartMoto program starting from the version 3.00, works
with the Smart-Clip connected to the LPT port (as usually) or to the
USB port, using Smart Adaptor.
 Smart Adaptor is approved to be
applicable for any Smart-Clip function (Smart-Clip updates as well
as phone flashing, unlocking, repairing etc).
LPT-port is not a crucial requirement anymore.
Features:
-
Windows 98SE/ME/2000/XP/Vista
compatible
-
Full compliance with all USB
Versions
-
Stable data transfer using USB
protocol
-
Offline PDS repair
-
High speed of data transfer
-
Cord length – 120 cm
Smart Adaptor installation
- Please download and install
SmartMoto v3.00 or later version.
- Connect Smart Adaptor to PC
USB port.
- The system detects a new
device.
- Please locate the driver
for Smart Adapter form SmartMoto installed directory:
C\Program Files\GsmServer\SmartMoto\drivers\ClipUSB\.
- Log to Update Zone at
www.smart-clip.com
- Select USB port in
"Communication Interface".
- Press "Connect" button.
- The updater detects the
Adaptor serial number.
- Press "Update Smart Adaptor"
button.
- Part of the new firmware will
be loaded to the device.
- The new device will be
detected by PC.
- Locate the driver for it
in the same directory
__:\Program Files\GsmServer\SmartMoto\drivers\ClipUSB\.
- The update process will
continue.
- New firmware is loaded to
device.
- The Smart Adaptor is
ready to be used for any Smart-Clip function*.
*
Smart Adaptor can be used for Smart-Clip updates as well as for
phone flashing, unlocking, repairing etc.
Download driver
here. |
|
| |
|
