Full RJ45 Cable Pack For
SonyEricsson, Lg 3G, Sharp 3G
New Design Box Allows use of
High Speed RJ45 Cables (no 9v
batteries required)
Access to SE-Tool Support area
for free updates and flash files
Access to support forum
Full Software installer on CD
6
Months warranty
FoneFunShop Bonus Gift
1 X Demonstration video on CD
showing you how to flash &
Unlock. more are available if
needed in our
Training Video Area
especially for new methodsa of
unlocking as new methods are
released by setool team.
Optional Extras
Setup Video CD
this video is created by
fonefunshop engineers to give
you the ultimate in setup
support. It shows you how to get
your software and drivers setup
correctly, enabling you to get
up and running in minutes.
Extra Cables
are available, these cables are
not included in standard
package, but will be needed to
work with certain phones.
Flash File
DVD's Although all flash files are
downloadable via SE-Tool
software, these DVD's will give you
the files you need instantly.
Test Sim
Card is needed for unlocking
functions that involve use of
phone menus if you do not have a
sim for original network.
more info
Express Remote Installation
Service:
Remote installation of your
unlocking equipment.
Simple procedure, let us do the
hard work!details
here
Order Today
More
Related Products
Below are links to
other related add-on's specific to this tool.
HOT SE Tool Credits for
advanced unlocking / flashing
features available
here
ESSENTIAL HELPERSE Tool
Advisor is an essential software add-on to
help any unlocker get the settings he needs to
unlock and flash Today's Sony Ericsson phones
using SE Tool, order separately
here
Extra Video Tutorials
these videos are created by
FoneFunShop engineers and will
teach you to use your equipment
correctly & successfully. The
videos can be downloaded anytime
from our
Training Video Area
Demo Video
At FoneFunShop we don't just
supply unlocking/flashing equipment, we use them ourselves
in-house too !!
This video is only a low-res
sample of our High-Res
Training Video Area, but should give you an idea of how
the tool works.
LG CF360, LG CF750, LG GR500, LG GT500, LG KF750, LG KF755, LG
KG757, LG KT520, LG KT525, LG KS500, LG KU580, LG TU750 SAGEM my730c, SAGEM my750x, SAGEM my850c
SEtool 3 Standalone
service features for NEW SE platform phones
Unlock any current cid (16/29/36) NEW SEMC
phones
Repair any current cid (16/29/36) NEW SEMC
phones
Write custom languge packs on any current cid
(16/29/36) NEW SEMC phones
Flash and change language packs on all current
NEW SEMC phones
Upgrade flash (free) WITHOUT changing lp on any
current cid (16/29/36) NEW SEMC phones
Read GDFS zone backup of all parameters (e.g.
security, battery, calibration, et.c)
Write GDFS zone backup of all parameters (e.g.
security, battery, calibration, et.c)
Read data from any current cid (16/29/36)NEW
SEMC PHONES
Write and replace custom files in phone file
system (FAST fill with mp3, pictures, tones,
change SMS tones, et.c)
Decustomizeing any current cid (16/29/36)NEW
SEMC phones
Read user codes any current cid (16/29/36) NEW
SEMC phones
Remove camera shutter sound all current NEW SEMC
phones
Reset total call timer any current cid
(16/29/36) NEW SEMC phones
Repair damaged gdfs area any current cid
(16/29/36) NEW SEMC phones
Change CDA number and revision any current cid
(16/29/36) NEW SEMC phones
Change band locks any current cid (16/29/36) NEW
SEMC phones
Readfile, listdir, listfiles e.t.c.
repair on all supported SEMC phones
K500/K700/S700/Z500 empty board filling.
Ultra-fast flashing by usb any current cid
(16/29/36) NEW SEMC phones
Up
to 16 phones can be supported now at once
LG Features
SEtool 3 Standalone
service features for LG3G, SE platform based phones
Convert phones from red to brown
Convert phones from brown to red
Unlock all current versions of
U8110,U8120,U8120c(i),U8130,U8130c,U8138,U8138c,U8180,8330(i),U8360,U8380
Repairs fully damaged gdfs and filesystem of
U8110,U8120,U8120c(i),U8130,U8130c,U8138,U8138c,U8180,8330(i),U8360,U8380
Read/write gdfs
Fashing of
U8110,U8120,U8120c(i),U8130,U8130c,U8138,U8138c,U8180,8330(i),U8360,U8380
"force" Flashing for LG3G, to repair improperly
flashed LG3G u-series
repair for all supported LG phones
Ultra-fast flashing by usb any LG 3G phones
Sharp Features
SEtool 3 Standalone
service features for Sharp 801/902.
Unlock all versions 801/802/902/903sh/703sh
Repair all versions 801/802/902/903sh/703sh
Flash and change languages on all versions
801/802/902/903sh/703sh
Read GDFS zone backup of all parameters (e.g.
security, battery, calibration, et.c)
Write GDFS zone backup of all parameters (e.g.
security, battery, calibration, et.c)
Read data from all versions
801/802/902/903sh/703sh
repair for all version of
801/802/902/903sh/703sh
Ultra-fast flashing by usb all versions of
801/802/902/903sh/703sh
SCREENSHOTS
NEWS
FEB 24
setool update v0.915061
- added support for S1 AID04 neptune-based phones.
there is no alternative security bypass for such
phones, so only full network unlock supported.
- added support for A2 CID80.
there is no alternative security bypass for such
phones, so only full network unlock supported.
- few bugfixes.
FEB 13
Setool v0.915060 GUI Released
- broken calypso lite support, fixed
- further fixes for alternative bypass support
about high speed flashing.
1. not all a2 phones support it, you will get
errors: 3ee,3ed. in that case just disable high
speed usb flashing on a2 tab.
2. you need to attach phone to usb 2.0 capable
controller.
3. you need to use high quality usb cable, dcu60 is
NOT recommended (but can work). dcu65 IS
recommended."
NOV 06
Se tool update v0.915056
- added full support for s1_open PDA phones (satio).
big thanks to: cowboy, hardstone, shadowman,kris.sg
for testing,
arash for logo.
notes:
in order to boot satio you MUST check "signed mode"
read flash requires "signed mode" and "alternative
bypass" checked.
satio omap nand flash starts at 8000000
to execute network unlock/repair - check
both "signed mode" and "perform full unlock" then
press unlock
to reset user code - check only signed mode and
press unlock
if "unlock after flash" checked - user code will be
reset after flashing.
to flash satio you must add zip package to firmware
area.
do not unzip it !!!! just add.
- added possibility of generating new password for
account.
OCT 08
SETOOL UPDATE v0.915053
v0.915053
- a2 cid53 alternative bypass will not damage device
key anymore.
because of that one more phone restart required, but
who cares ?
- "unlock during flash" enabled for s1 phone patch
unlock
- some not important fixups, thx to imobile for
bugreports.
OCT 08
Setools Updates v0.915052
- tested,fixed and apporved support for db3350
phones, thx to imobile
as my "dear friends" used to say: world first,
genuine,blablabla,etc.
anyway, i'm sure everything works now for db3350 -
- full signature unlock
- altbypass mode
- flashing,filesystem,gdfs,trim area operations.
- regarding a2 cid53 phones:
use full signature unlock for FULLY GENUINE unlock.
it is fast and furious (tm)
use alternative bypass mode for completely damaged
phones.
it is slower, but can fix any software problem.
in next 2-3 days i will release next version, which
will not damage
device key in a2 cid53 phones when using alternative
bypass mode.
(need to arrange reset station upgrade, that require
some time)
in any way, i strongly recommend to use full
signature unlock for
a1/a2 phones - it is absolutely genuine and can not
tamper anything.
Jul 22
SeTool - v0.915039 Released
- signed mode S1 loaders updated to support latest
AID versions
- some not important bugfixes and addons
Jun 07
SeTool - v0.915038
released
timeout for A2 flashing increased, that fixed error
“can’t get NET header” on some models in the end of
filesystem flashing
- unsigned mode A2 loaders updated to latest
versions
- some not important bugfixes
04-05-2009
v0.915035
- updated model list
- updated bypass packages
- added support for db3200 cid49,cid51,cid52
alternative security bypass
- added support for db3200,db3210 cid53
flashing,gdfs operations,etc
- added support for db3200,db3210 cid53 unlocking
(via signature server, at the moment 2 credits
required)
1. select phone model
2. mark "signed mode", "do full unlock instead
usercode reset"
3. press "unlock/repair"
- added CORRECT PDA ACPU EROM recovery support for
all PDA.
1. select correct PDA model
2. find corresponding EROM in dist\eroms\, add it to
firmware area
3. select correct com/ufs port
4. press recovery
5. connect turned off phone
6. reflash phone via USB with normal firmware
- added script support for S1 phones in signed mode
(trim area operations)
- added security units auto backup for S1 phones in
signed mode
- few minor bugs fixed/added
- few gui enhancements
30-01-2009
v0.915032
- fixed "lg ku580" unlock bug
(after unlock phone hangs on "lg logo" and repair
flash was needed)
- some minor gui enhancements
25-01-2009v0.915031
- officially approved support for sagem a2
cid185,cid186 phones.
die,kukuruzer (and other "developers") stealers
(all you can do is steal and use ready stolen thing)
a BIG thanks going to tayeb_am for cid185 support
testing.
- added ECC mode selection for A2 phones.
"mode 0" required for phone,damaged by kukuruzer
(and other "things")
for normal firmwares "mode 1" is required.
- fixed many minor and major bugs.
- added many minor bugs ;) maybe not ;)
29-12-2008
s1 network unlock
enabled for both servers.
that means, users can unlock locosto-based semc
phones with "bugfixed mcu"
and neptune-based phones.
to make full unlock user should check both
"signed mode" and "do full unlock instead usercode
reset" settings.
first stage (signature calculation) will consume 2
credits.
second stage (unlock) requires at least 1 credit on
account, but will NOT consume credits.
service NOT working all 24 hours, so try your
luck...
11-11-2008
v0.915019
- possibility to repair total damaged a2 phones
(err: 060101)
- latest bypass packages added
- misc bugfixes
please note.
there is common now to make mirrrors and etc of
setool2 updates.
be content to know, that i do NOT guarantee that ANY
of that
mirrors NOT contains viruses,mailwares,whatever.
the ONLY 100% genuine updates are on support area
and in that thread.
v0.914037
Tuesday, 1 July 2008
- added testpoint for db2020 phones.
db2020 testpoint idea made by dre_ambox team.
as i respected that, i not included db2020 testpoint
in setool2
for a long time. but anything ends sometime.
now, setool2 users can enjoy gdfs db2020 gdfs
repair.
usage:
1. it is only and only for professionals.
users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific
pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's
GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and
execute them.
6. press "TP STAGE #2". read instructions and
execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write
correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with
needed CID.
10. phone now retail and repaired. fullflash phone
as usual.
testpoint pictures (courtesy of drea_mbox team)
included.
after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode
without ANY restrictions.
- greatly decreased locosto-based SEMC ODM phones
security bypass time.
(instead ~50 seconds, now we have ~18 seconds)
- minor bugfixes.
--------------------------------------------------------------------------------
v0.914037
Tuesday, 1 July 2008
- added testpoint for db2020 phones.
db2020 testpoint idea made by dre_ambox team.
as i respected that, i not included db2020 testpoint
in setool2
for a long time. but anything ends sometime.
now, setool2 users can enjoy gdfs db2020 gdfs
repair.
usage:
1. it is only and only for professionals.
users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific
pin. we suggesting to use +3.3v battery (battery
ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and
execute them.
6. press "TP STAGE #2". read instructions and
execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write
correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with
needed CID.
10. phone now retail and repaired. fullflash phone
as usual.
testpoint pictures (courtesy of drea_mbox team)
included.
after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode
without ANY restrictions.
--------------------------------------------------------------------------------
v0.914036
Tuesday, 24 June 2008
- added support for new locosto-based ODM phones -
T270,T280,R300,R306,T303,etc. supported
flash,correct unlock by patch,usercode reset. be
careful - select CORRECT model and CORRECT
flashfiles.
- updated phone model names
- minor bugfixes
--------------------------------------------------------------------------------
v0.914035
Wednesday, 11 June 2008
- updated a2 loaders to recent version
- updated supported flash types for locosto-based
phones
- updated phone model names
- minor bugfixes
--------------------------------------------------------------------------------
v0.914034
Thursday, 22 May 2008
- added FREE STANDALONE new alternative bypass
method for db201x cid53 phones.
please note that due lack of all needed loaders,
"identify" for cid53 db201x phones will only work
with DCU60.
--------------------------------------------------------------------------------
v0.914033
Wednesday, 21 May 2008
- added FREE STANDALONE new alternative bypass
method for db201x cid50/cid51, pnx5230 cid49/cid51,
db2020 cid49/cid51. you DO NOT NEED logs for them
anymore. PLEASE CHECK FAQ for important
instructions.
- added all latest bypass packages
--------------------------------------------------------------------------------
v0.914032
Friday, 16 May 2008
- not important bugfixes, just merged latest fixes
in different modules.
--------------------------------------------------------------------------------
v0.914031
Monday, 12 May 2008
- by request added pause after preparation part of
new altbypass method.
please check FAQ for change in procedure.
- added possibility to create restoration files
automatically.
for that, identify phone to find out what firmware
inside.
then, add that firmware to firmware area and
identify phone AGAIN.
rest file will be created if firmware is okay.
- added all latest BYPASS PACKAGES
--------------------------------------------------------------------------------
v0.914030
Saturday, 10 May 2008
- "complete after flash" was broken when using new
"alternative security bypass" mode. fixed
- "use preloader bypass mode" not allowed "unlock"
operations. fixed
- memory overrun was present, which sometimes
prevents phones from booting. fixed.
--------------------------------------------------------------------------------
v0.914029
Friday, 9 May 2008
- added free,standalone,no testpoint, no additional
expensive "tp cables"
alternative bypass method for following chipsets:
db201x cid52, db2020 cid52/cid53, pnx5230
cid52/cid53
all you need - is cheap TEST SIM CARD (or OPERATOR
card)
please, see all details about that method in THAT
FAQ post.
- fixed gdfs write problem in db201x brown phones
- added support for loader inside phone
(for QUICK patch/etc operations using new
alternative bypass method)
for that, run "executor" in phone (menu->games),
then check in settings
"use preloader security bypass" and then do desired
operation.
- misc other bugfixes, maybe some bugs, check and
report.
--------------------------------------------------------------------------------
v0.914028/UNI
Friday, 21 March 2008
- added db2020 cid53 standalone flashing/usercode
reset.
network unlock will work only via csca+signature
servers.
--------------------------------------------------------------------------------
v0.914026/UNI
Saturday, 15 March 2008
bugfixes,bugfixes...
- fixed cid52 OTP writing, was broken eons ego.
- added DB2020 emptyboards eroms, which are safe to
use with EROM upgrade.
- pnx5230 support was broken, should be fixed,
reports are welcome.
- changed usb support, perhaps will be
better,perhaps not.
public testing will show results.
- some internal changes/bugs/bugfixes/etc
--------------------------------------------------------------------------------
v0.914027/UNI
Tuesday, 11 March 2008
- usb multi-flashing was broken, fixed
- added separate cda handling for each model.
cda.ini format
[model]
description=cda_value
- misc gui changes
--------------------------------------------------------------------------------
v0.914023/UNI
Saturday, 26 January 2008
- modified locosto hs bypass algo, should be better
now
(previous algo sometimes producing "romboot not
answering" error)
- added flash manufactured output for
j110/j120/k200/k220 phones.
- operator digit was swapped in identify output.
--------------------------------------------------------------------------------
v0.914022/UNI
Tuesday, 1 January 2008
- added support for Locosto-based SEMC ODM models:
at present it is T250,Z320. supported both HS (red)
and GP (brown) models, interfaces: com/ufs only
present features: flashing, flash read, userlock
reset, network unlock (z320 is NOT rebooting after
unlock :D ) TA (eeprom) backup auto-creating after
each phone boot. be warned: booting of locosto-based
phones is tricky process - perhaps, you will need to
disconnect/connect cable/battery several times
before phone will start booting. BE WARNED: always
select correct model: z320 for z320 phones, t250 for
t250 phones Keep TA backups ! if you somehow damage
TA area and have no backup - you have dead phone
- fixed rare bug with "old security" pda phones
(appears in 021 version)
- some gui changes/fixes/addons
- perhaps, added some bugs ;) so please test and
report issues.
--------------------------------------------------------------------------------
v0.914021/UNI
Thursday, 20 December 2007
- added full a2 unlock via server.
usage is extremly same as with cid52 db2012/cid2
pnx5230/cid53 P1:
select phone model
on options, check "use server","do full unlock"
enter yours username/password
back to a2 tab
press unlock
request placed in queue, wait some time (up to 72
hours), retry.
follow program instructions (power on phone, install
modem drivers,etc)
- misc bugfixes
--------------------------------------------------------------------------------
v0.914020/UNI
Tuesday, 18 December 2007
- sometimes setool2 hangs on "Starting up..."
session. fixed.
thx to arash for reporting and hard testing.
- for fun added "phone branding" readout in
identify.
update only (replace old exe starting from 018
version with new)
--------------------------------------------------------------------------------
v0.914019/UNI
Monday, 17 December 2007
- A2 gdfs readout was incorrect from the beginning.
fixed. thx,arash.
- pair of cosmetic fixes.
--------------------------------------------------------------------------------
v0.914018/UNI
Monday, 17 December 2007
- fixed db2020 emptyboard filling (5 locks after
emptyboard fill) bug. Great sorry for that.
- many internal rebuilds to reduce memory
consumption,etc. so be ready for bugs.
- minor bugfixes
- added pnx5230 cid51 unlock by patch, change IMEI,
crossflashing, complete filesystem support.
both dcu60 and com/ufs are supported, while i
STRONGLY recommend DCU60
method requires 1 credit.
( that is NOT "gti" method, if someone want to start
blabling. Instead,i'm sure that all "lead
developers" will use my way and loaders patched by
me from that release ;) )
usage very same as CID49/CID50/CID51 db2012/db2020:
- check "use server", "alternative security bypass"
(that is mandatory), then
- if want to change IMEI - check
"unlock after flash",
"patch otp<>gdfs check in firmware",
"allow to change IMEI when unlocking"
- if want to unlock - check "unlock after flash"
--------------------------------------------------------------------------------
v0.914016/UNI
Thursday, 6 December 2007
- added correct network unlock via patch for
j110/j120 phones
(hehe, world first as far as i know ;) )
howto:
select phone model and press unlock.
power on phone, press <**<, enter any code.
if yours firmware unsupported for patch - you have
two options
- read fullflash (start 0 len 3F0000), upload it to
rapidshare and PM me link
- flash any firmware from support and do unlock
- ultrafast and ultrasafe userlock reset added for
j1x0,k2x0 phones
(select model, press unlock)
- there is two new files in script folder
j1x0_total_reset.arm - flash it to TOTALLY reset
j110/j120 phone
k2x0_total_reset.arm - flash it to TOTALLY reset
k200/k220 phone
(calltime,usercode,pictures,settings,etc is reset)
- slight cosmetic changes that were requested by
arash.
ps.
i will not do "unauthorized phone" repair and other
eeprom errors for j110/j120 - for that use other
tools - they deserving own peace of bread ;)
--------------------------------------------------------------------------------
v0.914015/UNI
Thursday, 29 November 2007
- from now after first stage of cid52 security
bypass user required to press "ready" to continue
(will greatly helps when doing many phones at once,
suggested by AlexG)
- "can't get packet props" after flashing should be
fixed now (still unsure, cause can't repeat it 100%
on mine phones, thx to vasilius for GREAT help
during bug investigating)
- some minor bugfixes (yes, Arash, pda+ufs will be
good now ;) )
hopefully next version will bring us corrected
j110/j120 flashing and unlock. maybe even t250 will
be supported (at least flashing/userlock reset)
well, if all be well, A2 unlock by logs will be
enabled too.
--------------------------------------------------------------------------------
v0.914012/UNI
Sunday, 18 November 2007
- gdfs commands for A2 phones was broken in script
processing. fixed.
- added experimental flashing support for
j110/j120/k200/k220 phones (currently works
flash,flash read,eeprom read)
- added experimental k200/k220 seczone repair
(simlock remover) select k200/k220 model and press
unlock to execute it. note. experimental. so pretty
please use eeprom backup option.
- still more bugs ? hunt them ;)
complete set of latest j110/j120/k200/k220 flashes
is available on support. soon will upload
"ultraquick" langpack-only packages.
--------------------------------------------------------------------------------
v0.914009/UNI
Sunday, 11 November 2007
- fixed slow phone search when doing second part of
CSCA unlock
- fixed "can't open port err:006" after gdfs read
- several gui bugs fixed.
- still more bugs ? hunt them ;)
important.
i got two reports that a2 phones after flash go to
infamous 5lock state. it is some bug in semc
firmwares, because to solve that "locks after
flashing", you need just power circle your phone.
--------------------------------------------------------------------------------
v0.914007/UNI James Bond Release ;)
Thursday, 8 November 2007
- fixed MAJOR bug, which prevents almost all
operations from work. (unlock by patch, cid49
operations, etc).
- fixed .vkp script processing
- added "complete phone" support for a2 phones. it
writing generic custpack with all languages enabled.
for PROPER complete - please use "normal" custpacks.
- still more bugs ? hunt them ;)
--------------------------------------------------------------------------------
v0.914006/UNI
Wednesday, 7 November 2007
- SEMC A2 phones support added.
currently supported : flashing, gdfs read/write,
scripting, userlock reset.
standalone, no server needed. network unlock will be
added later (via server)
RED,BROWN phone domains supported.
only DCU60 interface supported.
new script commands:
taread:AAAABBBB
read TA unit (former gdfs), where AAAA= partition
number, BBBB - unit
tawrite:AAAABBBBDDDD....
write TA unit (former gdfs), where AAAA= partition
number, BBBB - unit,
DDDD.... data
note, that script command "readfile:" not supported
by retail loader.
usually phone nicely works with dcu60 when attaching
it with "C" button,
but there is some really old protos, which requires
"2+5" buttons
(you should not meet such).
--------------------------------------------------------------------------------
setool2 v0.91380096
Saturday, 18 August 2007
Code:
- added IMEI change via patch for cid50/51 db2012
phones. howto:
select needed model.
on settings, mark "use server","use alternative
bypass",
"alllow IMEI change when unlocking","patch OTP<>GDFS
check"
press UNLOCK, enter desired IMEI.
patch requires 1 credit.
note, that is FLASH PATCH, so it IMEI will change to
original if you flash main part of firmware.
--------------------------------------------------------------------------------
setool2 v0.91380095
Thursday, 16 August 2007
SEMC end release.
Code:
- added FREE db2020/pnx5230/db2012/PDA
custpack uploading/gdfs read/write/userlock
operations.
you need CHECK use server (fill any login details)
for it.
if you WILL CHECK "use alternative security bypass",
you WILL need credits.
note - cid49/cid51 UNLOCKING via flash patch still
requires credits.
--------------------------------------------------------------------------------
setool2 v0.91380094
Saturday, 4 August 2007
Code:
- finally i got P1 phone and so - P1 support added.
supported flashing,gdfs read/write,usercode read.
unlocking supported via special server (read: not
supported)
- by request, during flashing phone on semc tab,
file in misc. edit now can be script or package.
- other bugfixes and bugs.
- added IMEI change patch for db2020 cid49/51
phones.
alas, but universalbugz released IMEI change patch
for db2020, and because of that i forced to release
same on setool2. of course, setool2 solution has
nothing common with universalbugz way (i even not
know yet how they making their patch) and developed
by myself in educational purposes long-long time
ago.
please be certain, that you can use IMEI patch on
own phone only for educational purposes,otherwise
you breaking law and blablabla.
note, that it is NOT IMEI repair (security zone
repair), but PATCH. it will NOT repair red blink
phones and can only be executed on 100% working
phones. if you flash main (update on seus) - OLD
IMEI will be restored.
patch is working on all recent DB2020 firmwares. i
have no idea and can't guarantee that it will work
on new firmwares.
(well, i CAN guarantee that it will NOT work ;) )
now, howto. well, you already know how, if you ever
tried
(of course, for educational purposes only) IMEI
change for db2000/2010 models.
in short - you have 2 ways.
first way:
1. select model, on settings check "use
altbypass","use server", "allow IMEI change when
unlocking","patch otp<>gdfs check in firmware"
2. on semc tab press unlock. phone will be unlocked
and you will be asked for new IMEI. cost - 1 credit.
second way:
1. select model, on settings check "use
altbypass","use server", "allow IMEI change when
unlocking","patch otp<>gdfs check in firmware",
"unlock after flash"
2. on semc tab, select main,fsimage,custpack. press
flash. phone will be flashed, customized, unlocked
and you will be asked for new IMEI. same, 1 credit.
--------------------------------------------------------------------------------
setool2 v0.91380092
Thursday, 26 July 2007
Code:
small bugfix update
- z530 "recovery" was broken,fixed.
- server error messages verbosity increased.
- some internal not important updates/fixes.
New users need to download and install Alcatraz v1.8
then download and install Alcatraz v5.4 update.exe
Existing customers need to download and install
Alcatraz v5.4 update.exe only
--------------------------------------------------------------------------------
setool2 v0.91380091
Wednesday, 27 June 2007
-added PDA brown cid36 to red49 conversion
(use
eroms\pda_ccpu_convert_red49_signed_brown36.zip)
- fixed AnyCID db2012 flashing with altbypass used
(f.e. when using cid52 flashes in cid51 phones)
- fixed brown cid49/cid51 file operations (amazing -
somebody using it )
- cosmetic works
--------------------------------------------------------------------------------
setool2 v0.91380089
Tuesday, 19 June 2007
Code:
- added possibility for converting BROWN PDA phones
to RED.
howto:
1. go to PDA tab.
2. select MODEL (any will do job)
3. uncheck all settings on settings tab.
4. add to firmware packages
eroms\pda_ccpu_convert_red49.zip
5. press flash.
6. your brown prototype phone ready to run with
latest firmware.
(thx going to arash for remote testing on his own
brown PDA.)
- updated db2020 bypass loader, thus fixed bug with
occasional flashing stalls, when altbypass option
enabled.
- misc cosmetic works.
--------------------------------------------------------------------------------
setool2 v0.91380086
Tuesday, 19 June 2007
Code:
- added db2012 brown cid51 support
(use eroms\db2012_erom_redcid51.ssw to convert phone
to retail)
- during csca unlock PDA phones will switch to
"normal mode" automatically
(well, at least they should - tested on
m600/p990/w950)
- "old security" pda bypass speed increased
- other minor improvements/bugfixes
--------------------------------------------------------------------------------
setool2 v0.91380084
Saturday, 2 June 2007
Code:
- due multiple user requests, added REST file
checking (press "identify", free)
- due same reason added auto-seczone-backup feature
(only when dcu60 used, press "identify", stored in
backup\%imei%\, free)
- enhanced altbypass behaviour when using com/ufs
interface.
--------------------------------------------------------------------------------
setool2 v0.91380083
Friday, 25 May 2007
- added PNX5230 CID52 flashing/usercode
reset/network unlock
(via special server)
- added PNX5230 identify (defeated lazyness at last)
- added normal e-gate vista drivers (tested and
working 100%)
- updated emptyboard support for "new security"
db2012 chips
- some minor "cosmetic works"
--------------------------------------------------------------------------------
v0.91380081
Saturday, 12 May 2007
- db2010 cid50/51 phones must work okay now
(do main+fs+custpack+unlock_after_flash combo if
there is no rest files)
- more "foolproof" work with "alternative security
bypass" option added
- some cosmetic things.
--------------------------------------------------------------------------------
v0.91380080
Saturday, 12 May 2007
- db2012 com/ufs csloader operations (i.e.
"complete")
was broken on normal speeds (dcu60 interface worked
ok).
that is fixed.
- a lot of users, when doing "erom upgrade"
(required to avoid err:30 on altbypass), forget to
uncheck
"alt bypass" option and lose logs without result.
altbypass is ignored now when doing "recovery".
so far no other bugs were discovered.
--------------------------------------------------------------------------------
v0.91380079
Wednesday, 9 May 2007
- added cid 49/50/51 alternative security bypass for
db2012/db2020 phones.
what that means ? that means, you can unlock with
flash patch
ALL cid49/50/51 DB2012/DB2020 phones.
all you need - VALID ACCOUNT WITH 1 (ONE) LOG, click
here to see credits resellers
check "user server" and "use alternative security
bypass",
then press desired operation.
of course, scripts is FULLY supported in THAT MODE.
--------------------------------------------------------------------------------
v0.91380077
Tuesday, 17 April 2007
- "err: 10" error when z530 recovery operation
executed fixed.
- customization packs now parsed when selected
(shows language info,etc)
- added phonebook extraction from gdfs .bin format
dump (NOT SSW).
usage is simple: select .bin file into misc. files
edit, gdfs will be
parsed and .vcf file will be created.
phonebook unit is courtesy of PANUA, thx to him.
- all CID>50 now assumed to be used with auth
dongle, to prevent credits loss.
- identify working now on USB interface
(in some cases reduced loaders are used, warning is
displayed in such case)
- some other not important fixes (bugs ? ;) )
--------------------------------------------------------------------------------
GUI v0.91380076
Monday, 26 March 2007
- corrected pnx5230 (z310) CSCA handling to prevent
log loss and phone "damage". once again i remind
that pnx5230 using same security as db2020 and we
limited now to flashing and userlock reset (until we
find some way to run server)
- included cid49_51_to_cid52 conversion. better not
use it... really.
WARNING. DUE MISTAKE, FIRST 076 VERSION WAS
RELEASED WITH SERIAL CHECK ROUTINE ENABLED.
IT IS REPLACED NOW WITH "NORMAL" VERSION.
SO EVERYBODY, WHO DOWNLOADED 076 AND RECEIVED
"WRONG SERIAL" ERROR - REDOWNLOAD DISTRIBUTIVE.
--------------------------------------------------------------------------------
GUI v0.91380075
Thursday, 22 March 2007
- added db2020 cid52 server support (flash,erom
upg,usercode reset, network unlock (when we will
restore server functionality))
- added db2012 cid51 server support ( flash,usercode
reset, network unlock)
- added pnx5230 (Z310) cid51 server support
(flash,usercode reset, identify NOT supported
yet,network unlock (when we will restore server
functionality))
- now all simlock types displayed in identify (state
shown only if lock is locked)
- changed .ini file handling, so you must again
rebuild settings. now settings for phones COMMON for
all windows, beware. from now on settings will be
intact when new models will be added.
- added new phone model names
- many internal changes,so please check for bugs.
db2020_firmware_in_gdfs_format added in distr.rar
for completely blank boards. phones.rar updated with
z310 driver for csca unlock
IMPORTANT ADDON. SADLY TO SAY (BLAME ME) -I NOT
CAREFULLY ENOUGH
LOOKED AT Z310 - SO - DO NOT NETWORK UNLOCK Z310 -
IT WILL BE DEAD.
OF COURSE, YOU CAN ALWAYS RESTORE IT TO "LIVE" WITH
SECURITY BACKUP,
WHICH IS DONE AUTOMATICALLY IN
"BACKUP\%IMEI%\%IMEI%_%DATETIME%.SECZONE"
YOU NEED WRITE IT AS SCRIPT.
--------------------------------------------------------------------------------
GUI v0.91380073
Wednesday, 28 February 2007
GUI v0.91380073
- changed csca unlock step1 behaviour. now, if there
is ANY *.seczone files in %setool2%\backup\%imei%\
folder,step1 (erasing locks and writing signature)
is skipped and step2 executing immediately. That is
done to prevent credit loss if on step2 phone
drivers installed incorrectly or if server
connection broken on previous attempt of step2.
if you ABSOLUTELY know what are you doing - you can
erase *.seczone files from %setool2%\backup\%imei%
and step1 will be executed again for that phone.
- added "dummy battery" option for UFS cables with
"crocodile" or otherwise called "dummy battery". if
you check that option - before each phone shutdown
we will execute grace delay to allow phone loader
finish its work (for example, without that option
you CAN get a "configuration error" on phones after
flashing them using UFS and cable with dummy
battery). grace period length is 5 seconds by
default, but it can be changed with option
"ufs_dummy_delay" in [main] section of setool2.ini
(period counted in ms, so ufs_dummy_delay=5000 is 5
seconds)
- very minor ui bugfixes.
--------------------------------------------------------------------------------
GUI v0.91380072
Monday, 26 February 2007
GUI v0.91380072
- made 5-times retry of each AT-query during csca
unlock step2 (should help when phone drivers
installation not finished)
- locks tab not works correctly when USB was used as
selected interface
- some cosmetic fixes
--------------------------------------------------------------------------------
GUI v0.91380071
Friday, 23 February 2007
GUI v0.91380071
first, and most important news.
you are not required now to register on support or
use login/password to login on support area.
all you need - download software from
www.setool.net, install drivers and press GO SUPPORT
button.
- added some missed models...
- fixed some cosmetic bugs
--------------------------------------------------------------------------------
GUI v0.91380069
Saturday, 17 February 2007
GUI v0.91380069
- profiles now correctly load settings for models
when switching only tabs.
- return to old scheme cid/color detection for
db2020 usb operations (some users reports that phone
COLOR/CID can't be detected)
- added some models (w880,k550) so yes, yes. you
must again remade profiles.
- db2020 empyboard filling supported (because i saw
my "friend" on kukuruzer
takes money for that,while it is standalone process
and not requires any special moves, that is unfair
and i shall fix it). quick howto:
-go to empty tab
-select ANY db2020 model
-fill desired IMEI (or not fill if you have not want
to write it)
-check WRITE OTP (or not check if you not want to
write it)
-select CID49 (required)
-select needed brown2red erom
-press FLASH
-phone now complete retail (especially if you wrote
otp) and must be serviced as any retail db2020 phone
(note - NOT USE EROM UPGRADE)
--------------------------------------------------------------------------------
GUI v0.91380068
Tuesday, 13 February 2007
GUI v0.91380068
mostly it is cosmetic release, but some intresting
things added.
Code:
- added strings for several "missing" db2020 models.
semc model list sorted ;)
- changed csca unlock stage 2 behaviour - it will
search phone now until phone will be found or until
you press stop. that must help save credits for some
ppl.
- changed PDA detection. must be better and faster
now. (remember : attach PDA only when you told to do
so)
- changed script command "gdfsread" behaviour - now
if you read several gdfs units from script, all
units will go as one file named %imei%, instead of
old "one file per one unit" behaviour
- setool2 will now save full session logs in
directory "logs"
- updated patch-loaders from DB2010/DB2020 (white
screen "solution")
- other cosmetic fixes, more info displayed
sometimes,etc.
- new bugs, of course. waiting for reports to fix it
;)
--------------------------------------------------------------------------------
GUI v0.91380066
Wednesday, 7 February 2007
GUI v0.91380066
- during csca unlock we now enumerate only present
ports (to be more simple - stage 2 of csca unlock
became faster in most cases)
- J220/J230/Z300 phones with "new" security
supported (7-digits lock numbers)
- DB2020 CID51 full identify support
- DB2020 CID51 EROM upgrade
- minor bugfixes.
--------------------------------------------------------------------------------
GUI v0.91380065
Tuesday, 30 January 2007
GUI v0.91380065
- public testing of db2020 phones reveals a error:
if you, in same window, unlocked any NOT db2020
phone and then attempting to unlock db2020 phone -
you will loose 1 credit and phone will be in "red
blink" state after second step. of course, backup is
created, so you can restore phone back to "live
state. received signature is correct too, so yours 7
creds is not wasted. such thing has been fixed in
current version.
--------------------------------------------------------------------------------
GUI v0.91380064
Sunday, 28 January 2007
GUI v0.91380064
- it was reported, that on some rare db2020 phones
you got following error
Code:
loader unlock: executed
Backup security data...
var not exists
Fail
Elapsed:22 secs.
it has been fixed.
SEtool2
http://setool.net/common/v0.91380064.rar
--------------------------------------------------------------------------------
GUI v0.91380063
Sunday, 28 January 2007
GUI v0.91380063
- sadly,but in v0.91380063 DB2020 OTP CID51 support
was broken, fixed
- added SERVER-BASED FULL PERMANENT DB2020 UNLOCK.
how to use.
select USB as interface. that is REQUIRED.
select K610 as phone model (or any other DB2020
model, they are same)
settings - check "use server for csca unlock/flash",
"do full unlock instead of usercode reset for
db2020", fill your login details.
back to semc tab, press unlock, attach phone with
pressed "C" (or 2+5) buttons.
wait for signature calculation, it can took about 2
minute.
if calculation will fail, your credits will NOT be
deducted.
if calculation is success, then signature will be
saved in backup\%imei% folder in your setool2
directory.
next, backup will be created so you will be able to
restore phone if something will go wrong (hardly
believe, but who knows...)
next, you will be prompted to detach phone and turn
it on. do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
connect phone to usb.
if phone will ask you switch to phone mode - switch
to phone mode.
it can ask you for drivers,if you not installed them
previously.
install all drivers (links below)
be SURE that you install all drivers correctly.
press "testpoint ok"
procedure will continue,phone will be switched off
and unlocked.
remember, if something will go wrong - you have a
backup of security units.
cost of DB2020 unlock is 12 credits.
currently, BOTH servers are supporting DB2020 unlock
as usual, credits will NOT be recovered in case of
connection failures.
NOTE! there is STILL REMAIN SERVER-BASED USERCODE
RESET FOR DB2020.
it will work, if you UNCHECK option "do full unlock
instead of usercode reset for db2020" and press
UNLOCK.
because of recent problems with sql server on
support area, i will post links to new version and
phone drivers here. hosting provider are informed
about probles and, hopefully, they will be solved.
phone drivers
http://setool.net/common/phones.rar
SEtool2
http://setool.net/common/v0.91380063.rar
--------------------------------------------------------------------------------
GUI v0.91380062
Thursday, 25 January 2007
GUI v0.91380062 - otp<>gdfs imei check now supports
latest pda firmware - some internal changes
--------------------------------------------------------------------------------
GUI v0.91380061
Monday, 15 January 2007
GUI v0.91380061
- cosmetic - fixed error message during lg unlock.
- cosmetic - wrong chipid (connections problems)
filtered now.
- addon - added workaround for white screen problem
on db2010 sibley-based phones with ST flash and
db2020 phones with ST flash.
note - that is not panacea. it will only help
SOMETIMES. usage is very simple - just full flash
white screen phone with latest fw version using 061
setool2 version.
rest files archive finally synched with latest rest
files. if you already downloaded all rest files from
news thread - you not need download rest archive.
--------------------------------------------------------------------------------
GUI v0.91380060
Sunday, 7 January 2007
GUI v0.91380060
- added support for DB2020 CID51 operations
(flash,read/write gdfs,script,uselock reset,well,
all standart operations)
- "unlock after flash" incorrectly works with
sharp3g phones USB flashing. fixed.
- "unlock after flash" for lg3g+testpoint now recalc
security automatically.
- misc minor bugfixes.
--------------------------------------------------------------------------------
GUI v0.91380058
Thursday, 28 December 2006
GUI v0.91380058
- bugfix. sometimes (very-very rare readout in ssw
format was incorrect). fixed. ( thx goes to vascoff
for reporting bug )
- added csca-based unlock for NEW PDA revisions and
K320 (well, you can use it for all other models,
except db2020-based, but it will be waste of
credits)
how-to.
1. insert DCU60 (only that is supported for csca
unlock) in TURNED ON PHONE
2. install drivers. included drivers for PDAs
(drivers\hermione) and for K320
(drivers\k320_usb_signed_drivers)
3. turn off phone, disconnect it
4. select needed model
5. check "use server for csca unlock/flash"
6. press unlock
7. when prompted, detach phone, turn it on and
insert cable
8. wait until all drivers appears
9. press testpoint ok - phone will be unlocked.
notes
- csca-unlock only supported on .198 server
- csca-unlock will NOT cure yours phone if you wrote
to it GDFS from other phone
- csca-unlock will only work stable and good on
DCU60
for now price for csca-unlock 5 credits
csca-logs are rare, so they will periodically
deplete, while flashing-log are still be online. i
will inform about it in log-info thread
--------------------------------------------------------------------------------
GUI v0.91380057
Saturday, 23 December 2006
GUI v0.91380057
- critical bugfix
- support was broken for all CID49 DB2000 phones.
fixed. thx to duzz for report.
--------------------------------------------------------------------------------
GUI v0.91380056
Saturday, 23 December 2006
GUI v0.91380056
- P990 chinese-based flashfiles failed on USERDATA
part. fixed. (chinese flashes updated, you MUST
re-download them)
- i decided to reveal some feature for PDA phones.
story:
SEMC PDA phones has two revisions of chips. "new"
and "old".
"new" revision has changed security system and can
not be made standalone.
"old" revision has just impoved security and can be
breached.
so, as small present in upcoming new year, you have
now opportunity to work FULLY (rebuild security
(unlocking), change IMEI, read/write gdfs, change
CDA) with OLD REVISIONS of PDA (and there is a LOT
OF THEM) WITHOUT SERVER.
for that, first, you need determine security type
(press identify, i attached two screens with old and
new security)
if security new - bad luck.
if security old - uncheck use server and do whatever
you like
rest files attached, extract them to rest folder.
--------------------------------------------------------------------------------
GUI v0.91380055
Tuesday, 19 December 2006
GUI v0.91380055
- user lock was incorrectly displayed if digit
numbers uneven. fixed
- lg3g patching will be faster on SOME firmwares.
- added SERVER-based support for FLASHING,
standalone support for usercode read for new SEMC
smartphones
- m600/m608/w950/w958/p990.
carefully read instruction - that will help you NOT
to kill expensive thing.
instructions.
first, you need download needed firmware package.
add it to firmware area on smartphone tab.
check "use server" and enter your login/password.
now, you need install drivers for flashing.
for that, poweron smartphone in fw update mode.
- for p990/m600 press and hold "@" on TURNED OFF
phone, then attach dcu60.
- for w950 press and hold "C" on TURNED OFF phone,
then attach dcu60.
windows will ask you for a drivers. drivers in
%setool2 dist%\drivers\HermioneDrivers. i attached a
picture how correctly installed drivers must look in
device manager.
now, you can press desired operation.
identify - to readout phone information (and
userlock)
flash - to flash package.
!note. there is a checkbox named "process PDA update
files" if you UNCHECK it - NO CREDIT WILL BE
DEDUCTED from your account, but CDA will be
UNCHANGED in phone. you got me ? ( got, lol ) yes,
that is FREE FLASHING.
!note. if you flashing multiple smartphones, BE SURE
THAT DRIVERS ARE INSTALLED BEFORE starting desired
operation.
read gdfs - read gdfs for different things.
write gdfs - write gdfs back.
!note. if you write gdfs from other phone, say
bye-bye to yours expensive pda.
well, enough.
lets flash'em.
ps.
p990 flashes will be uploaded in next day-two.
--------------------------------------------------------------------------------
GUI v0.91380054
Saturday, 16 December 2006
GUI v0.91380054
- K320 SERVER support added
- FREE USERCODE READ added (press identify) - works
for db2000/2010/db2012
- misc. bugfixes
- new bugs (hope not )
K320 R4EA031 firmware and customization packs
uploaded.
--------------------------------------------------------------------------------
GUI v0.91380050
Saturday, 9 December 2006
GUI v0.91380050
- bugfix. somehow i broke completely red49 support
for k750/z520 series. fixed.
--------------------------------------------------------------------------------
GUI v0.91380049
Saturday, 9 December 2006
GUI v0.91380049
some stable ( ) release and some NEW features.
- fixup for some db2020 mobiles booting (err:36 and
so on) - fixup for some sibley-based
(w300/k310/k510/w300/z550/w810) flash break
- new feature. red cid49 phones (db2000/db2010) can
now be flashed via USB with ENORMOUS FAST speed
using usual dcu60 cable (or miniusb for k600/z800).
FROM NOW NO ONE CAN SAY "my XXX box flashing faster
than yours setool2" supported ONLY RED CID 49
PHONES.
there is several restrictions.
first.
UNLOCK is working. BUT if yours gdfs is damaged
(rewrited from other phone) - you REQUIRED to use
com/ufs connections to repair security values.
second.
IMEI change not working because of same reason.
third.
EROM must be intact in order for USB flashing work.
fourth.
no more restriction.
some timings:
fullflash of w810 phone - 360 seconds. (about 700 by
uart)
fullflash of w900 phone - 733 seconds. (about 1400
by uart)
--------------------------------------------------------------------------------
GUI v0.91380047
Tuesday, 5 December 2006
GUI v0.91380047
interim fixup release.
- critical bug fixed - on some db2020 phones (diff
hw ???) flashing was terminating with "subblock NAK"
error. should be fixed.
- db2020 identify now displays all information about
phone state.
--------------------------------------------------------------------------------
GUI v0.91380046
Thursday, 30 November 2006
GUI v0.91380046
interim fixup release.
- cosmetic addons, like "unused" buttons disabled
now when needed
- CID change lower than original and color change if
OTP locked prohibited.
- critical bug fixed - on all sibley based phones,
if you set "unlock after flash" and "complete phone"
- gdfs startup was stalled. thx to vasilius for
reporting and help in finding and eliminating bug.
- added several gdfs in bin format.
- other internal updates.
- m600/w950 support will be ready really soon....
--------------------------------------------------------------------------------
GUI v0.91380044
Saturday, 25 November 2006
GUI v0.91380044
interim fixup release.
- added support for z300/j220/j230 renesas flash
(mfgid:1c)
- script with files references now must correctly
executing from any directory
- simlock codes now random during unlocking
- countless internal tunings/fixups/preparations.
- new bugs, and i hope you help me to find them
--------------------------------------------------------------------------------
GUI v0.91380043
Wednesday, 11 October 2006
GUI v0.91380043
- added usercode reset for db2020 phone. Requires
server credits.
how to use - two way
first way good when doing only usercode reset
- check "use server".
- select correct model
- press unlock. usercode will be resetted to 0000
Second way good when flashing.
- check "use server"
- check "unlock after flash"
- check "complete phone" if you need it
- select correct model
- press flash. phone will be flashed and user code
will be resetted to 0000
--------------------------------------------------------------------------------
UI v0.91380042
Monday, 25 September 2006
UI v0.91380042
that is very beta, main target is support "new"
flash chip in z300/j220/j230.
"new flash symptom" was "empty" codes when reading
and garbled flash readout, unabilty to flash.
hopefully, all of that was fixed, but need checking.
support was done blindly,so ... you have been
warned.
please, try "unlock" first, and only if it works try
flash.
"unlock" CAN NOT kill your phone
once again, i have no response for dead phone - THAT
IS TEST version.
New feature is ".vkp" support. .vkp is patches,
maded by different persons to tune your phone. those
who need that patches know where to get them.
Soon i will made a .vkp request thread here and will
ask some famous patchers to visit that thread.
Usage simple - put .vkp file in misc. edit and press
write script.
Sibley-based (w300/w810/k310/k510/z550) emptyboards
support was flawed, fixed.
as i remember - locks were incorrectly written,
should be fixed.
rest.rar updated with latest restoration files.
--------------------------------------------------------------------------------
GUI v0.91380041
Thursday, 14 September 2006
- added brown to red db2020 conversion.
how to use.
UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify
and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press
recovery - phone will be brown cid49
next, convert phone to red.
select correct model, select correct conversion EROM
(example - phone is k610, conversion EROM is
eroms\k610_erom_cnv_brown2red.cry )
press flash.
your phone is read and ready to flash using credits
system.
( because of obvious reasons filesystem read not
supported for brown 2020,unlocking is not supported
for brown 2020,well... only flashing possible )
- profiles auto load at startup now
- misc loaders updated
- recovery procedure for z530 updated a bit.
--------------------------------------------------------------------------------
GUI v0.91380040
Wednesday, 6 September 2006
GUI v0.91380040
- protector update, now setool2 must co-exist with
KAV
- it has been found, that in Z530 EROM not HW
protected.
Because of that,possible to revive Z530 phones with
damaged erom.
How to do:
on semc tab, select z530 in model list.
press recovery.
phone will be recovered and attempt will be made to
repair EROM.
most possible, you will need to reflash phone in
order to get it fully working.
warning. if you select z530 and will use recovery
with k310/k510/w300/w810/z550 phone - you will
receive dead brick. it is only usable for current
breed of Z530 phones
--------------------------------------------------------------------------------
GUI v0.91380039
Friday, 1 September 2006
GUI v0.91380039
- SEMCsec released EROM updater for db2020.
it can help with red blink and "gdfs startup
error:29" on db2020 phones.
it can't help to repair damaged security units.
it only works on com/ufs cables.
how to use - settings, set USE SERVER.
semc tab - select phone model
press recovery.
erom must be upgraded and possible your problem
solved.
- some fixes in com cables and db2020 booting
- card unblocking not works as intended, fixed.
--------------------------------------------------------------------------------
GUI v0.91380038
Monday, 31 July 2006
GUI v0.91380038
- nested directory creation during package restore
was broken, fixed.
--------------------------------------------------------------------------------
GUI v0.91380037
Thursday, 27 July 2006
GUI v0.91380037
- by mistake, phone repowered during complete,
fixed.
- profiles now saves settings separate for every
model in every window.
- some other ll test improvements...
--------------------------------------------------------------------------------
New card version of the standalone (v0.91380036)
Wednesday, 19 July 2006
New card version of the standalone (v0.91380036) is
out! Download it from the Downloads section.
- change - added "support" for nice tool of arash
(simple put his exe in directory and press E)
- bugfix - setool2 not working properly under dead
os (win95/98/me).fixed.
- bugfix - some cosmetic low-level fixes
--------------------------------------------------------------------------------
New card version of the standalone (v0.91380035)
Tuesday, 18 July 2006
New card version of the standalone (v0.91380035) is
out! Download it from the Downloads section.
- change - added server-based db2020 model
(k800,v630,k610) flashing
- bugfix - misc bugfixes.
- bugfix - rest files updated, was some errors in
k600 rest files.
--------------------------------------------------------------------------------
New card version of the standalone (v0.91380034)
Friday, 7 July 2006
New card version of the standalone (v0.91380034) is
out! Download it from the Downloads section.
- bugfix - during flashing many phones at once
software freezes.
- bugfix - lg3g patching code impoved to support
some of latest fw.
- bugfix - with selected "w550/w600 old" complete
not worked. fixed.
- bugfix - during ssw conversion of small files GPF
occured
- bugfix - rare occuring bug during imei patch for
w300/z530/w810/k510/k310 fixed
- bugfix - locks operation for for
w300/z530/w810/k510/k310 fixed
--------------------------------------------------------------------------------
GUI v0.91380033
Wednesday, 5 July 2006
GUI v0.91380033
- bugfix - during flashing many phones at once
software freezes.
- bugfix - lg3g patching code impoved to support
some of latest fw.
- bugfix - with selected "w550/w600 old" complete
not worked. fixed.
--------------------------------------------------------------------------------
GUI v0.91380032
Saturday, 1 July 2006
GUI v0.91380032
as i promised, complete low-level rewrite is here.
many bugfixes, hopefully, not much new bugs.
changes:
- packages now simple zip files( backward
compability with .pkg not maintained,sorry). That
allows to use original semc customization packs and
easy maintain any OWN customization pack for
usability added possibility to write package after
flashing. If anything selected in "misc.files"
field, it is threated as package and we try to write
it into phone after flashing process. Note ! if you
write original customization pack, you don't need do
complete
customization files available on support. will add
more models soon.
- fast imei patching added. works for all firmwares
of semc,lg and sharp,which i have (and i have a lot
of them). to use it there is plenty of ways:
1. check "patch otp<>gdfs check in firmware" , check
"allow to change imei when unlocking" and press
unlock
2. check same + "unlock after flash".press flash.
phone will flash selected files, then will patch
imei check and unlock/repair phone. yes, imei patch
works for w810/w300/k310/k510/z530
- i waited and waited, but nobody from semc
"developers" came with patching of new firmware
versions for sharp 703/903. so i tired of waiting
and made it. Let they steal (as they usually do) and
learn how to do things right. yes,yes - direct flash
patching of new firmware versions added. sadly, i
still can't get red73 loader (and i think will not
get it for a loooong time), so you must use
testpoint. it is not hard and safe, if use usb cable
instead battery and be careful with needle.
- empty board handling changed. now, all you need to
do is on empty board tab - recovery with brown cid49
,enter IMEI, select erom if needed, select
gdfs_in_ssw_format and press flash. after it, phone
will be usual phone and must be handled in semc tab.
- my friend vasilius draw more user friendly GUI.
- profiles now auto-load when model changed. models
slightly separated.
- connect ufs removed, now ufs simple another
communication port
- latest ufs cables for k750 has one uart only, they
not work at high speed when completing phone. it
must be fixed now.
- unicode support when reading and writing files.
- MNC2/3 selectable support added in locks.
- updated drivers for ufs and 4in1 cable.
- other minor and major bugfixes and changes.
download at support and report bugs and wishes.
--------------------------------------------------------------------------------
GUI v0.91380031
Saturday, 24 June 2006
GUI v0.91380031
- now you can really flash any CID flash file in any
CID phone.
- some bugfixes
ps.
i'm going to complete rewrite setool2 on normal
compiler.
prepare for many bugs and sone intresting features
--------------------------------------------------------------------------------
GUI v0.91380030
Friday, 9 June 2006
- there was a problem - if you checked "unlock after
flash" and flash lg3g red41/42/54, after flash phone
was dead (need to unlock with tp afterward). that
issue was fixed , it works like designed now.
- internal rebuilds, preparing for db2020 unlock and
flash support.
IMPORTANT INFORMATION
SEMC, by error, released some number (BIG) of BROWN
w700 with LOCKED OTP
when flashing, that phones will produce such errors:
Code:
.......
CSloader version:
060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER
loader startup: executed
wrong responce, break.
loader filesystem startup failed, that is fatal
YOU NEED TO FLASH SPECIAL EROM from
eroms\w700red_erom.ssw.cry and AFTER flashing that
erom repeat complete sequence.
flashing any other EROMs will bring you to
testpoint.
--------------------------------------------------------------------------------
GUI v0.91380028
Thursday, 25 May 2006
- on some systems "protection error" appears, while
older versions work ok. must be fixed.
- some lowlevel tuning
--------------------------------------------------------------------------------
GUI v0.91380027
Thursday, 18 May 2006
- Finally j220/j230 fully working and tested (read
codes/read flash/flash firmware)
--------------------------------------------------------------------------------
GUI v0.91380025
Wednesday, 17 May 2006
- fixed "readdir" command - full support for w700
added - from now on restoration files will be
distributed separate from main distribute. that is
done for cases when only main or only rest files
updated.(you need BOTH rest files package and main
package)
PS:You CAN flash w700 fw into k750.but no single
advantage and you will lose camera even if manually
replace camera driver - it still refuses to work.
--------------------------------------------------------------------------------
GUI v0.91380024
Tuesday, 16 May 2006
GUI v0.91380024
- added experimental support for j220/j230 phones.
not tested , but must work.There is only pair of
flashes for test. after (not) successful tests will
add all other.
- fixed incorrect work of command
"readpkg","readdir" when single root directory
specified.
- rest files package synched with current rest files
--------------------------------------------------------------------------------
GUI v0.91380023
Saturday, 13 May 2006
GUI v0.91380023
- readflash fixed- some very internal problem fixed,
hopefully damned exists will disappear.- updated
rest files- added w550 gdfs in ssw format download
from support area.
--------------------------------------------------------------------------------
GUI v0.91380022
Saturday, 13 May 2006
GUI v0.91380022
- added read files functionality for z530/w810
phones. some speedup,heheh.
- bugfixes (i not remember exact what i fix, maybe
some ignition probs,maybe not)
- raw z300 support added (read codes,flash,read
flash, read/write nvram). latest flashfiles for z300
uploaded at support.please note. if you will write
in yours z300 FULL readout from other z300 - it will
go dead and only emma3 (at present) will resurrect
it. if you will write in yours z300 NVRAM from other
z300 - it will became zombie too.if you somehow
manage to damage boot area (0x0++0x10000) - your
phone is complete junk, can't be repaired NEVER.
from my side, though, i done all possible so you
CAN'T write boot. so, you have been warned.
--------------------------------------------------------------------------------
GUI v0.91380021
Thursday, 11 May 2006
GUI v0.91380021
- CRITICAL bug fixed - db2000 red49 phones unlock
was broken, which resulted constant "5 locks".
fixed. (sometimes even bad thing is good.probably
fixing that bug will help me to make lg3g red41/42
scrc fix without tp ) - updated rest files, added
z530/w810/k750 gdfs in ssw format (frec folder)
--------------------------------------------------------------------------------
GUI v0.91380020
Wednesday, 3 May 2006
GUI v0.91380020
- fixed issue with UFS "dummy battery" cable, which
CAN bring to dead red49 phone (can only be
resurrected by tp).probably that fix will brings
more safe red49 operations.
- slightly updated rest files.
- different not important issues.
download at support.
--------------------------------------------------------------------------------
GUI v0.91380019
Tuesday, 2 May 2006
GUI v0.91380019
- added, FIRST IN THE WORLD, complete support for
red49 w810/z530.no-tp, of course. so. now setool
first (as usual) supports all red49 phone line.
- flashes with most recent w810 and z530 is on
support.
note:
- if you damage your erom - that version will NOT
help you for any red49 phone.
A note to universaldongle
- look at my work, steal it,use it - but know - you
are always no.2 on scene.
same applies to other developers, who NOT came with
w810 no-tp until now.
--------------------------------------------------------------------------------
GUI v0.91380018
Friday, 21 April 2006
- probably fixed db2010 cid49problems (w550, error
"bootloader not responds").
(note, it is not means that phones, killed by
recovery can be repaired without tp with that
version, it is only for those phones, which "hangs"
on bootloader sequence)
- added support (experimental) for red49 k750/w800
phones. no rest files for them at moment
- means you must reflash phone completely. of
course, you can create own rest files, as usual.
- changed rest files behaviour . now, if "rest.
file" edit is empty, program attempts to auto-search
for version and auto-restore it from rest folder.
- changed EROMs for new db2010 models (to prevent
phone death after change certificate)
- as usual, fighting with execryptor bugs
(quits,crashes,etc)
- fixed other minor bugs.
- added new bugs (not know yet where and what )
--------------------------------------------------------------------------------
Welcome to SE Tool 3 Box Official Website
Tuesday, 11 April 2006
Welcome to SE Tool 3 Box Official Website
--------------------------------------------------------------------------------
New card version of the standalone (v0.91380034)
Tuesday, 4 April 2006
New card version of the standalone (v0.91380034) is
out! Download it from the Downloads section.
- bugfix - during flashing many phones at once
software freezes.
- bugfix - lg3g patching code impoved to support
some of latest fw.
- bugfix - with selected "w550/w600 old" complete
not worked. fixed.
- bugfix - during ssw conversion of small files GPF
occured
- bugfix - rare occuring bug during imei patch for
w300/z530/w810/k510/k310 fixed
- bugfix - locks operation for for
w300/z530/w810/k510/k310 fixed
--------------------------------------------------------------------------------
GUI v0.91380017
Tuesday, 4 April 2006
GUI v0.91380017
New Bugfix release.
fixed some bugs, possible solved HT problem, some
memory leaks.. nothing usual.
--------------------------------------------------------------------------------
GUI v0.91380015
Friday, 24 March 2006
GUI v0.91380015
- comport routines changed completely. need detailed
test
- added very raw locks handling. only for those who
needs it.
- fixed w900 gdfs write option
- fixed brown49 handling
- fixed numerous internal bugs,some ui
improvements..
- new bugs added
a note about comport ignition... reminder - if phone
not begins to boot, not stop program, but disconnect
cable, remove battery, insert battery and attach
cable....
--------------------------------------------------------------------------------
GUI v0.91380013
Thursday, 16 March 2006
GUI v0.91380013
- csloader was broken when using testpoint on db2010
cid49 phones. fixed
--------------------------------------------------------------------------------
GUI v0.91380012
Wednesday, 15 March 2006
GUI v0.91380012
- tuned ufs
- reverted to old comport routines (although they
not perfect, they work)
--------------------------------------------------------------------------------
GUI v0.91380010
Tuesday, 14 March 2006
GUI v0.91380010
- fixed IMEI changing with w900
- tuned communications with comport, fixed
NAK-errors
- added "Identify" for brown phones
--------------------------------------------------------------------------------
GUI v0.91380011
Tuesday, 14 March 2006
GUI v0.91380011
- fixed ufs ignition with new drivers (i tested on
3.01.04)
- fixed identify
- again tuned com routines
- disabled recovery for all red49 phones (too much
users killed their phones with it)
- returned old way for w550/w600 handling
notes on db2010 red49 support. seems, new method is
half-working on db2010 phones.
now, there is two w550 in model selection - old and
new.
try first old, then, if it will not work - try new.
if new will not work too - only tp.
--------------------------------------------------------------------------------
GUI v0.91380009
Monday, 13 March 2006
GUI v0.91380009
- added FULL RED CID49 NO TESTPOINT support for NEW
W500/W600, NEW K600/V600/K608, W900, see notes below
- updated "direct flash patching" for new sharp
703/903 firmwares
- testpoint usage allowed on sharp phones now
- testpoint usage reduced during operations
- added profiles support
- added "phone id" button (test cable, recognize
phone cid,etc)
- slightly tuned ignition on ufs/com/dss - must be
better
- fixed imei changing problem on w550/w600 in no-tp
mode.
- some other internal modifications
- new bugs (unknown yet)
--------------------------------------------------------------------------------
GUI v0.91373018
Sunday, 12 February 2006
GUI v0.91373018
returned to old version of execryptor.
